Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera TASKalfa 6501i Top Searches

These results are ranked by popularity.

Error
9070Description: Communication error between DP and SHD A communication error is detected.
8100Description: DF eject release motor error When the DF eject release motor is driven, DF bundle discharge sensor does not turn on within 1 s.
F278Description: Power supply in drive system error
6740Description: Abnormally high fuser IH PWB temperature 2 (IGBT2) The input detect temperature is higher than 115°C/ 221 °F.
0980Description: 24 V power down detect If a 24V power disconnection signal is observed and a 12V power disconnection signal is observed simultaneously for one second.

Kyocera TASKalfa 6501i Common Errors

The most common error codes.

Error
9070Description: Communication error between DP and SHD A communication error is detected.
8100Description: DF eject release motor error When the DF eject release motor is driven, DF bundle discharge sensor does not turn on within 1 s.
F278Description: Power supply in drive system error
6740Description: Abnormally high fuser IH PWB temperature 2 (IGBT2) The input detect temperature is higher than 115°C/ 221 °F.
0980Description: 24 V power down detect If a 24V power disconnection signal is observed and a 12V power disconnection signal is observed simultaneously for one second.
9070Description: Communication error between DP and SHD A communication error is detected.
F278Description: Power supply in drive system error
6740Description: Abnormally high fuser IH PWB temperature 2 (IGBT2) The input detect temperature is higher than 115°C/ 221 °F.
0980Description: 24 V power down detect If a 24V power disconnection signal is observed and a 12V power disconnection signal is observed simultaneously for one second.
3220Description: CCD lamp activation error The threshold is calculated for colors at initialization and the pixel which does not exceed that value is greater than 1000.