Kyocera TASKalfa 5500i Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera TASKalfa 5500i Top Searches

These results are ranked by popularity.

Error
9070Description: Communication error between DP and SHD A communication error is detected.
8150Description: DF tray motor error 2 When the main tray has descended, DF tray sensor 1 or DF tray upper surface sensor does not turn off within 5s.
6250Description: Abnormally low fuser thermistor 2 temperature Fuser thermistor 2 detects a temperature lower than 50°C/ 122°F for 1 s after warming up.
2101Description: Developer motor error After developer motor is driven, the ready signal does not turn to L within 5 s. After developer motor is stabilized, the ready signal is at the H level for 5 s continuously.
8310Description: CF side registration motor 2 error When initial operation, CF side registration sensor 2 does not turn on within 1 s.

Kyocera TASKalfa 5500i Common Errors

The most common error codes.

Error
9070Description: Communication error between DP and SHD A communication error is detected.
8150Description: DF tray motor error 2 When the main tray has descended, DF tray sensor 1 or DF tray upper surface sensor does not turn off within 5s.
6250Description: Abnormally low fuser thermistor 2 temperature Fuser thermistor 2 detects a temperature lower than 50°C/ 122°F for 1 s after warming up.
2101Description: Developer motor error After developer motor is driven, the ready signal does not turn to L within 5 s. After developer motor is stabilized, the ready signal is at the H level for 5 s continuously.
8310Description: CF side registration motor 2 error When initial operation, CF side registration sensor 2 does not turn on within 1 s.
9070Description: Communication error between DP and SHD A communication error is detected.
8150Description: DF tray motor error 2 When the main tray has descended, DF tray sensor 1 or DF tray upper surface sensor does not turn off within 5s.
6250Description: Abnormally low fuser thermistor 2 temperature Fuser thermistor 2 detects a temperature lower than 50°C/ 122°F for 1 s after warming up.
2101Description: Developer motor error After developer motor is driven, the ready signal does not turn to L within 5 s. After developer motor is stabilized, the ready signal is at the H level for 5 s continuously.
8310Description: CF side registration motor 2 error When initial operation, CF side registration sensor 2 does not turn on within 1 s.