Kyocera TASKalfa 400ci Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera TASKalfa 400ci Top Searches

These results are ranked by popularity.

Error
C2700Description: Color release motor error After driving of the color release motor starts, the error signal is not at the H level for 4 s continuously. After driving of the color release motor starts, the release signal does not turn to the L level within
C1800Description: Paper feeder communication error (optional paper feeder) A communication error from paper feeder is detected 10 times in succession.
C7103Description: Toner sensor M problem Sensor output value of 60 or less or 944 or more continued for 3 s.
C8230Description: Stapler motor problem (optional 3000sheet document finisher) Jam 82 is indicated.
C2233Description: Drum motor M main sensor error No signal is input to the sensor for 1.5 s continuously.

Kyocera TASKalfa 400ci Common Errors

The most common error codes.

Error
C2700Description: Color release motor error After driving of the color release motor starts, the error signal is not at the H level for 4 s continuously. After driving of the color release motor starts, the release signal does not turn to the L level within
C1800Description: Paper feeder communication error (optional paper feeder) A communication error from paper feeder is detected 10 times in succession.
C7103Description: Toner sensor M problem Sensor output value of 60 or less or 944 or more continued for 3 s.
C8230Description: Stapler motor problem (optional 3000sheet document finisher) Jam 82 is indicated.
C2233Description: Drum motor M main sensor error No signal is input to the sensor for 1.5 s continuously.
C2700Description: Color release motor error After driving of the color release motor starts, the error signal is not at the H level for 4 s continuously. After driving of the color release motor starts, the release signal does not turn to the L level within
C1800Description: Paper feeder communication error (optional paper feeder) A communication error from paper feeder is detected 10 times in succession.
C7103Description: Toner sensor M problem Sensor output value of 60 or less or 944 or more continued for 3 s.
C8230Description: Stapler motor problem (optional 3000sheet document finisher) Jam 82 is indicated.
C2233Description: Drum motor M main sensor error No signal is input to the sensor for 1.5 s continuously.