Kyocera TASKalfa 3551ci Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera TASKalfa 3551ci Top Searches

These results are ranked by popularity.

Error
8090Description: DF paddle motor error When the DF paddle motor is driven, DF paddle sensor does not turn on within 1 s.
1110Description: PF lift motor 2 error (large capacity feeder) After cassette 4 is inserted, PF lift sensor 2 does not turn on within 23 s. This error is detected 5 times successively. (Time to detect is 2 seconds at the second time and later.) During drivi
7233Description: Short-circuited LSU thermistor M The sensor input sampling is less than 69.
6610Description: Fuser release sensor error The fusing pressure release sensor won’t send an off signal in 5 seconds since a pressure release instruction is given for the fusing pressure motor. The fusing pressure release sensor won’t send an on signal in 5
4012Description: Polygon motor C steadystate error After polygon motor C is stabilized, the ready signal is at the H level for 15 s continuously.

Kyocera TASKalfa 3551ci Common Errors

The most common error codes.

Error
8090Description: DF paddle motor error When the DF paddle motor is driven, DF paddle sensor does not turn on within 1 s.
1110Description: PF lift motor 2 error (large capacity feeder) After cassette 4 is inserted, PF lift sensor 2 does not turn on within 23 s. This error is detected 5 times successively. (Time to detect is 2 seconds at the second time and later.) During drivi
7233Description: Short-circuited LSU thermistor M The sensor input sampling is less than 69.
6610Description: Fuser release sensor error The fusing pressure release sensor won’t send an off signal in 5 seconds since a pressure release instruction is given for the fusing pressure motor. The fusing pressure release sensor won’t send an on signal in 5
4012Description: Polygon motor C steadystate error After polygon motor C is stabilized, the ready signal is at the H level for 15 s continuously.
8090Description: DF paddle motor error When the DF paddle motor is driven, DF paddle sensor does not turn on within 1 s.
1110Description: PF lift motor 2 error (large capacity feeder) After cassette 4 is inserted, PF lift sensor 2 does not turn on within 23 s. This error is detected 5 times successively. (Time to detect is 2 seconds at the second time and later.) During drivi
7233Description: Short-circuited LSU thermistor M The sensor input sampling is less than 69.
6610Description: Fuser release sensor error The fusing pressure release sensor won’t send an off signal in 5 seconds since a pressure release instruction is given for the fusing pressure motor. The fusing pressure release sensor won’t send an on signal in 5
4012Description: Polygon motor C steadystate error After polygon motor C is stabilized, the ready signal is at the H level for 15 s continuously.