Kyocera TASKalfa 3550ci Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera TASKalfa 3550ci Top Searches

These results are ranked by popularity.

Error
8130Description: DF shift release motor error When the DF shift release motor is driven, DF shift release sensor does not turn on within 1 s.
1250Description: SM multi feed sensor communication error (side multi tray) A communication error is detected 3 times in succession.
7244Description: Broken developer thermistor Y wire The sensor input sampling is greater than 230.
6760Description: Fuser IH input over-current error The input current is greater than 20A for 100 ms in succession.
4103Description: BD initialization error M After polygon motor M is driven, ASIC detects a BD error for 1 s

Kyocera TASKalfa 3550ci Common Errors

The most common error codes.

Error
8130Description: DF shift release motor error When the DF shift release motor is driven, DF shift release sensor does not turn on within 1 s.
1250Description: SM multi feed sensor communication error (side multi tray) A communication error is detected 3 times in succession.
7244Description: Broken developer thermistor Y wire The sensor input sampling is greater than 230.
6760Description: Fuser IH input over-current error The input current is greater than 20A for 100 ms in succession.
4103Description: BD initialization error M After polygon motor M is driven, ASIC detects a BD error for 1 s
8130Description: DF shift release motor error When the DF shift release motor is driven, DF shift release sensor does not turn on within 1 s.
1250Description: SM multi feed sensor communication error (side multi tray) A communication error is detected 3 times in succession.
7244Description: Broken developer thermistor Y wire The sensor input sampling is greater than 230.
6760Description: Fuser IH input over-current error The input current is greater than 20A for 100 ms in succession.
4103Description: BD initialization error M After polygon motor M is driven, ASIC detects a BD error for 1 s