Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera TASKalfa 3010i Top Searches

These results are ranked by popularity.

Error
8020Description: Punch motor 2 error Home position is not obtained in 3 s after home position is initialized or in standby.
2010Description: Main motor startup error Main motor is not stabilized within 1 s since the motor is activated.
9120Description: Sensor error in coin vender change (Yen 10) Change is empty despite change is enough.
0350Description: Panel PWB communication error (electronic volume I2C communication error NACK is received during I2C communication - retried 5 times - rebooting command sent - retried 5 times If NACK is still received.
8230Description: DF staple motor error 1 Staple JAM (DF) has been detected twice in a row. (The second JAM detection condition fullfilled with the home position did not detected in 600 ms after the motor was driven.)

Kyocera TASKalfa 3010i Common Errors

The most common error codes.

Error
8020Description: Punch motor 2 error Home position is not obtained in 3 s after home position is initialized or in standby.
2010Description: Main motor startup error Main motor is not stabilized within 1 s since the motor is activated.
9120Description: Sensor error in coin vender change (Yen 10) Change is empty despite change is enough.
0350Description: Panel PWB communication error (electronic volume I2C communication error NACK is received during I2C communication - retried 5 times - rebooting command sent - retried 5 times If NACK is still received.
8230Description: DF staple motor error 1 Staple JAM (DF) has been detected twice in a row. (The second JAM detection condition fullfilled with the home position did not detected in 600 ms after the motor was driven.)
8020Description: Punch motor 2 error Home position is not obtained in 3 s after home position is initialized or in standby.
2010Description: Main motor startup error Main motor is not stabilized within 1 s since the motor is activated.
9120Description: Sensor error in coin vender change (Yen 10) Change is empty despite change is enough.
0350Description: Panel PWB communication error (electronic volume I2C communication error NACK is received during I2C communication - retried 5 times - rebooting command sent - retried 5 times If NACK is still received.
8230Description: DF staple motor error 1 Staple JAM (DF) has been detected twice in a row. (The second JAM detection condition fullfilled with the home position did not detected in 600 ms after the motor was driven.)