Kyocera TASKalfa 300ci Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera TASKalfa 300ci Top Searches

These results are ranked by popularity.

Error
C9050Description: DP lift motor going down error (optional DP) The tray lower limit switch does not turn on within 2 s of DP lift motor turning on.
C6000Description: Fuser heater 1 break Fuser thermistor 1 detects a temperature lower than the Ready indication temperature for 90 s during warming up. Fuser thermistor 1 deduced less than 130 C/266F for 5 s during stand-by. Fuser thermistor 1 does not reach
C0640Description: Hard disk drive problem The hard disk cannot be accessed.
C8210Description: Stapler moving motor 1 error (optional 3000-sheet document finisher) When operation returned to a home position is performed at the time of initial operation and a home position is not detected even if 1.5 s passed. Stapler problem (optiona
C2232Description: Drum motor C main sensor error No signal is input to the sensor for 1.5 s continuously.

Kyocera TASKalfa 300ci Common Errors

The most common error codes.

Error
C9050Description: DP lift motor going down error (optional DP) The tray lower limit switch does not turn on within 2 s of DP lift motor turning on.
C6000Description: Fuser heater 1 break Fuser thermistor 1 detects a temperature lower than the Ready indication temperature for 90 s during warming up. Fuser thermistor 1 deduced less than 130 C/266F for 5 s during stand-by. Fuser thermistor 1 does not reach
C0640Description: Hard disk drive problem The hard disk cannot be accessed.
C8210Description: Stapler moving motor 1 error (optional 3000-sheet document finisher) When operation returned to a home position is performed at the time of initial operation and a home position is not detected even if 1.5 s passed. Stapler problem (optiona
C2232Description: Drum motor C main sensor error No signal is input to the sensor for 1.5 s continuously.
C9050Description: DP lift motor going down error (optional DP) The tray lower limit switch does not turn on within 2 s of DP lift motor turning on.
C6000Description: Fuser heater 1 break Fuser thermistor 1 detects a temperature lower than the Ready indication temperature for 90 s during warming up. Fuser thermistor 1 deduced less than 130 C/266F for 5 s during stand-by. Fuser thermistor 1 does not reach
C0640Description: Hard disk drive problem The hard disk cannot be accessed.
C8210Description: Stapler moving motor 1 error (optional 3000-sheet document finisher) When operation returned to a home position is performed at the time of initial operation and a home position is not detected even if 1.5 s passed. Stapler problem (optiona
C2232Description: Drum motor C main sensor error No signal is input to the sensor for 1.5 s continuously.