Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera TASKalfa 2420w Top Searches

These results are ranked by popularity.

Error
E-0000Description: Fuser Temperature Rising Error Fuser Temperature does not reach 50C within 120 seconds after turning on.
E-0033Description: Transfer Corona Output Error The Transfer Corona Output Detection Signal (TR_LD) continues to be “L” for 1 second or longer when the Transfer Corona is ON.
E-0001Description: Fuser Over Temperature Error Fuser Temperature reaches over 200C.
E-0034Description: Bias Output Error Bias Output Detection Signal (BIAS_LD) continues to be “L” for 1 second or longer when a specified bias is supplied to the corresponding Developer Unit components.
E-0002Description: Fuser Low Temperature Error 1. Fuser Temperature at the time of turning on was 50 to 100C, but it does not rise up to 120C within 150 seconds after that. 2. Fuser Temperature at the time of turning on was higher than 100C, but it does not r

Kyocera TASKalfa 2420w Common Errors

The most common error codes.

Error
E-0000Description: Fuser Temperature Rising Error Fuser Temperature does not reach 50C within 120 seconds after turning on.
E-0033Description: Transfer Corona Output Error The Transfer Corona Output Detection Signal (TR_LD) continues to be “L” for 1 second or longer when the Transfer Corona is ON.
E-0001Description: Fuser Over Temperature Error Fuser Temperature reaches over 200C.
E-0034Description: Bias Output Error Bias Output Detection Signal (BIAS_LD) continues to be “L” for 1 second or longer when a specified bias is supplied to the corresponding Developer Unit components.
E-0002Description: Fuser Low Temperature Error 1. Fuser Temperature at the time of turning on was 50 to 100C, but it does not rise up to 120C within 150 seconds after that. 2. Fuser Temperature at the time of turning on was higher than 100C, but it does not r
E-0000Description: Fuser Temperature Rising Error Fuser Temperature does not reach 50C within 120 seconds after turning on.
E-0033Description: Transfer Corona Output Error The Transfer Corona Output Detection Signal (TR_LD) continues to be “L” for 1 second or longer when the Transfer Corona is ON.
E-0001Description: Fuser Over Temperature Error Fuser Temperature reaches over 200C.
E-0034Description: Bias Output Error Bias Output Detection Signal (BIAS_LD) continues to be “L” for 1 second or longer when a specified bias is supplied to the corresponding Developer Unit components.
E-0002Description: Fuser Low Temperature Error 1. Fuser Temperature at the time of turning on was 50 to 100C, but it does not rise up to 120C within 150 seconds after that. 2. Fuser Temperature at the time of turning on was higher than 100C, but it does not r