Kyocera TASKalfa 205c Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera TASKalfa 205c Top Searches

These results are ranked by popularity.

Error
0070Description: FAX control PWB incompatible detection error In the initial communication with the FAX control PWB, the normal communication command is not transmitted.
2310Description: Fuser motor startup error Fuser motor is not stabilized within 2 s since the motor is activated.
9500Description: BRU communication error
7420Description: Transfer belt unit type mismatch problem Absence of the transfer belt unit is detected.
6200Description: Broken fuser edge heater wire Fuser thermistor 1 does not reach 50° C/122 °F even after20 s during warming up. The detected temperature of fuser thermistor1 does not reach the specified temperature (ready indication temperature) for 20 s in

Kyocera TASKalfa 205c Common Errors

The most common error codes.

Error
0070Description: FAX control PWB incompatible detection error In the initial communication with the FAX control PWB, the normal communication command is not transmitted.
2310Description: Fuser motor startup error Fuser motor is not stabilized within 2 s since the motor is activated.
9500Description: BRU communication error
7420Description: Transfer belt unit type mismatch problem Absence of the transfer belt unit is detected.
6200Description: Broken fuser edge heater wire Fuser thermistor 1 does not reach 50° C/122 °F even after20 s during warming up. The detected temperature of fuser thermistor1 does not reach the specified temperature (ready indication temperature) for 20 s in
0070Description: FAX control PWB incompatible detection error In the initial communication with the FAX control PWB, the normal communication command is not transmitted.
2310Description: Fuser motor startup error Fuser motor is not stabilized within 2 s since the motor is activated.
9500Description: BRU communication error
7420Description: Transfer belt unit type mismatch problem Absence of the transfer belt unit is detected.
6200Description: Broken fuser edge heater wire Fuser thermistor 1 does not reach 50° C/122 °F even after20 s during warming up. The detected temperature of fuser thermistor1 does not reach the specified temperature (ready indication temperature) for 20 s in