Konica-Minolta Di552 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Di552 Top Searches

These results are ranked by popularity.

Error
C1300Description: Polygon Motor malfunction • No Lock signals are detected for the period of 5 to 20 sec. after the motor has started turning after the Power Switch was turned ON. • No Lock signals are detected for the period of 5 to 20 sec. after the motor
C0B34Description: Paper Aligning Mechanism malfunction
C0400Description: Exposure Lamp’s failure to turn ON • During a light intensity adjustment sequence, the CCD read data does not exceed the specified level when the peak of the intensity of light is detected within 1 min. after the Exposure Lamp has turned ON
C18XXDescription: SCSI communications unit failure
C0914Description: 2nd Drawer Lift-Up Motor’s failure to turn The 2nd Drawer Paper Lift-Up Motor Pulse Sensor detects no edges of rotation detection pulses even after the lapse of 500 ms after the 2nd Drawer Paper Lift-Up Motor has started turning.

Konica-Minolta Di552 Common Errors

The most common error codes.

Error
C1300Description: Polygon Motor malfunction • No Lock signals are detected for the period of 5 to 20 sec. after the motor has started turning after the Power Switch was turned ON. • No Lock signals are detected for the period of 5 to 20 sec. after the motor
C0B34Description: Paper Aligning Mechanism malfunction
C0400Description: Exposure Lamp’s failure to turn ON • During a light intensity adjustment sequence, the CCD read data does not exceed the specified level when the peak of the intensity of light is detected within 1 min. after the Exposure Lamp has turned ON
C18XXDescription: SCSI communications unit failure
C0914Description: 2nd Drawer Lift-Up Motor’s failure to turn The 2nd Drawer Paper Lift-Up Motor Pulse Sensor detects no edges of rotation detection pulses even after the lapse of 500 ms after the 2nd Drawer Paper Lift-Up Motor has started turning.
C1300Description: Polygon Motor malfunction • No Lock signals are detected for the period of 5 to 20 sec. after the motor has started turning after the Power Switch was turned ON. • No Lock signals are detected for the period of 5 to 20 sec. after the motor
C0B34Description: Paper Aligning Mechanism malfunction
C0400Description: Exposure Lamp’s failure to turn ON • During a light intensity adjustment sequence, the CCD read data does not exceed the specified level when the peak of the intensity of light is detected within 1 min. after the Exposure Lamp has turned ON
C18XXDescription: SCSI communications unit failure
C0914Description: 2nd Drawer Lift-Up Motor’s failure to turn The 2nd Drawer Paper Lift-Up Motor Pulse Sensor detects no edges of rotation detection pulses even after the lapse of 500 ms after the 2nd Drawer Paper Lift-Up Motor has started turning.