Error |
---|
These results are ranked by popularity.
Error | |
---|---|
SC77-03 | Description: FN-113/122 abnormality The CD Aligning Home Position Sensor (PC9) does not go HIGH even after the lapse of a given period of time after M5 has been energized (to start returning the Aligning Plate to its home position). |
E46-21 | Description: Image control abnormality Decompression from the memory to the page memory is not completed within the specified time. Compression from the page memory to the memory is not completed within the specified time. Decompression from the memory |
F77-41 | Description: Cover Inserter B/E abnormality After M202 (tray up/down /L) starts operation, PS209 (tray upper limit /L) or PS210 (tray lower limit /L) do not turn ON within the specified time. |
F46-61 | Description: Image control abnormality Scanning started before completion of original auto skew correction. (Skew correction was not in time). |
F29-03 | Description: Process abnormality Control patches are not output while Dmax correction is in process. (No output from the Dmax sensor.) |
The most common error codes.
Error | |
---|---|
SC77-03 | Description: FN-113/122 abnormality The CD Aligning Home Position Sensor (PC9) does not go HIGH even after the lapse of a given period of time after M5 has been energized (to start returning the Aligning Plate to its home position). |
E46-21 | Description: Image control abnormality Decompression from the memory to the page memory is not completed within the specified time. Compression from the page memory to the memory is not completed within the specified time. Decompression from the memory |
F77-41 | Description: Cover Inserter B/E abnormality After M202 (tray up/down /L) starts operation, PS209 (tray upper limit /L) or PS210 (tray lower limit /L) do not turn ON within the specified time. |
F46-61 | Description: Image control abnormality Scanning started before completion of original auto skew correction. (Skew correction was not in time). |
F29-03 | Description: Process abnormality Control patches are not output while Dmax correction is in process. (No output from the Dmax sensor.) |
SC77-03 | Description: FN-113/122 abnormality The CD Aligning Home Position Sensor (PC9) does not go HIGH even after the lapse of a given period of time after M5 has been energized (to start returning the Aligning Plate to its home position). |
E46-21 | Description: Image control abnormality Decompression from the memory to the page memory is not completed within the specified time. Compression from the page memory to the memory is not completed within the specified time. Decompression from the memory |
F77-41 | Description: Cover Inserter B/E abnormality After M202 (tray up/down /L) starts operation, PS209 (tray upper limit /L) or PS210 (tray lower limit /L) do not turn ON within the specified time. |
F46-61 | Description: Image control abnormality Scanning started before completion of original auto skew correction. (Skew correction was not in time). |
F29-03 | Description: Process abnormality Control patches are not output while Dmax correction is in process. (No output from the Dmax sensor.) |