Konica-Minolta Di551 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Di551 Top Searches

These results are ranked by popularity.

Error
F77-25Description: FN-112/6/ 121/10/115 abnormality PS22(folding knife HP) does not go ON within the specified time after M19(folding knife) starts operation of HP detection.
F42-02Description: Fan abnormality An error for WRFAN1_EM signal is detected when 2 seconds have passed since FM2 (write section cooling) has turned ON. The error does not clear after 2 seconds from the OFF/ON operation.
SC77-03Description: FN-113/122 abnormality The CD Aligning Home Position Sensor (PC9) does not go HIGH even after the lapse of a given period of time after M5 has been energized (to start returning the Aligning Plate to its home position).
F21-05Description: Wire cleaning abnormality The lock signal for M10(transfer/separation cleaning) is not detected when more than 25 seconds have passed since the return motion (back to front) of M10 has started.
E46-83Description: Image control abnormality The message reception event is undefined.

Konica-Minolta Di551 Common Errors

The most common error codes.

Error
F77-25Description: FN-112/6/ 121/10/115 abnormality PS22(folding knife HP) does not go ON within the specified time after M19(folding knife) starts operation of HP detection.
F42-02Description: Fan abnormality An error for WRFAN1_EM signal is detected when 2 seconds have passed since FM2 (write section cooling) has turned ON. The error does not clear after 2 seconds from the OFF/ON operation.
SC77-03Description: FN-113/122 abnormality The CD Aligning Home Position Sensor (PC9) does not go HIGH even after the lapse of a given period of time after M5 has been energized (to start returning the Aligning Plate to its home position).
F21-05Description: Wire cleaning abnormality The lock signal for M10(transfer/separation cleaning) is not detected when more than 25 seconds have passed since the return motion (back to front) of M10 has started.
E46-83Description: Image control abnormality The message reception event is undefined.
F77-25Description: FN-112/6/ 121/10/115 abnormality PS22(folding knife HP) does not go ON within the specified time after M19(folding knife) starts operation of HP detection.
F42-02Description: Fan abnormality An error for WRFAN1_EM signal is detected when 2 seconds have passed since FM2 (write section cooling) has turned ON. The error does not clear after 2 seconds from the OFF/ON operation.
SC77-03Description: FN-113/122 abnormality The CD Aligning Home Position Sensor (PC9) does not go HIGH even after the lapse of a given period of time after M5 has been energized (to start returning the Aligning Plate to its home position).
F21-05Description: Wire cleaning abnormality The lock signal for M10(transfer/separation cleaning) is not detected when more than 25 seconds have passed since the return motion (back to front) of M10 has started.
E46-83Description: Image control abnormality The message reception event is undefined.