Konica-Minolta Di351 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Di351 Top Searches

These results are ranked by popularity.

Error
C0B00Description: Transport Motor drive malfunction
C0B78Description: Hole Position Selector Motor drive malfunction (U.S.A. and Canada)
C13F0Description: HSYNC detection failure • The SOS falling edge is not detected for 0.2 sec. or more after the Polygon Motor has been energized and laser output started. • No SOS falling edges are detected while VIA remains ON.
C0500Description: Warming-up failure The temperature of the Fusing Rollers does not reach the required level even after the lapse of a given period of time during a warm-up cycle. • From room temperature to 100 °C: Within 65 sec. • From 100 °C to 140 °C: Wit
C0B20Description: Stapling Unit Moving Motor drive malfunction

Konica-Minolta Di351 Common Errors

The most common error codes.

Error
C0B00Description: Transport Motor drive malfunction
C0B78Description: Hole Position Selector Motor drive malfunction (U.S.A. and Canada)
C13F0Description: HSYNC detection failure • The SOS falling edge is not detected for 0.2 sec. or more after the Polygon Motor has been energized and laser output started. • No SOS falling edges are detected while VIA remains ON.
C0500Description: Warming-up failure The temperature of the Fusing Rollers does not reach the required level even after the lapse of a given period of time during a warm-up cycle. • From room temperature to 100 °C: Within 65 sec. • From 100 °C to 140 °C: Wit
C0B20Description: Stapling Unit Moving Motor drive malfunction
C0B00Description: Transport Motor drive malfunction
C0B78Description: Hole Position Selector Motor drive malfunction (U.S.A. and Canada)
C13F0Description: HSYNC detection failure • The SOS falling edge is not detected for 0.2 sec. or more after the Polygon Motor has been energized and laser output started. • No SOS falling edges are detected while VIA remains ON.
C0500Description: Warming-up failure The temperature of the Fusing Rollers does not reach the required level even after the lapse of a given period of time during a warm-up cycle. • From room temperature to 100 °C: Within 65 sec. • From 100 °C to 140 °C: Wit
C0B20Description: Stapling Unit Moving Motor drive malfunction