Konica-Minolta Di2510 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Di2510 Top Searches

These results are ranked by popularity.

Error
C0B4BDescription: Shutter Drive Failure
C0511Description: Low Fuser Temperature Failure (Sub) • The Fusing Roller Thermistor and Fusing Roller Sub Thermistor are detected to be at a temperature below 105C during standby. • The Fusing Roller Thermistor and Fusing Roller Sub Thermistor are detected
C133ADescription: Main Unit G/A Communication Failure • Communications with the gate array for expansion I/O (the IC mounted on the Master Board) fail.
C0997Description: LCC Shift Gate Operation Failure • The Shift Gate Home Position Sensor (PC14-LCC) cannot be set to L even after the set period of time has elapsed after the operation of the Shift Gate Motor (M3-LCC) has begun with the Shift Gate Home Posit
C0B56Description: Saddle Staple 1 Drive Failure

Konica-Minolta Di2510 Common Errors

The most common error codes.

Error
C0B4BDescription: Shutter Drive Failure
C0511Description: Low Fuser Temperature Failure (Sub) • The Fusing Roller Thermistor and Fusing Roller Sub Thermistor are detected to be at a temperature below 105C during standby. • The Fusing Roller Thermistor and Fusing Roller Sub Thermistor are detected
C133ADescription: Main Unit G/A Communication Failure • Communications with the gate array for expansion I/O (the IC mounted on the Master Board) fail.
C0997Description: LCC Shift Gate Operation Failure • The Shift Gate Home Position Sensor (PC14-LCC) cannot be set to L even after the set period of time has elapsed after the operation of the Shift Gate Motor (M3-LCC) has begun with the Shift Gate Home Posit
C0B56Description: Saddle Staple 1 Drive Failure
C0B4BDescription: Shutter Drive Failure
C0511Description: Low Fuser Temperature Failure (Sub) • The Fusing Roller Thermistor and Fusing Roller Sub Thermistor are detected to be at a temperature below 105C during standby. • The Fusing Roller Thermistor and Fusing Roller Sub Thermistor are detected
C133ADescription: Main Unit G/A Communication Failure • Communications with the gate array for expansion I/O (the IC mounted on the Master Board) fail.
C0997Description: LCC Shift Gate Operation Failure • The Shift Gate Home Position Sensor (PC14-LCC) cannot be set to L even after the set period of time has elapsed after the operation of the Shift Gate Motor (M3-LCC) has begun with the Shift Gate Home Posit
C0B56Description: Saddle Staple 1 Drive Failure