Konica-Minolta Di251 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Di251 Top Searches

These results are ranked by popularity.

Error
C0B4DDescription: Paper Holding Tray Motor drive malfunction
C0045Description: Cooling Fan Motor malfunction The Lock signal remains HIGH or LOW for a continuous 1-sec. period or more while the Cooling Fan Motor remains energized.
C1300Description: Polygon Motor malfunction • The Lock signal is not detected at any time during a given period of time 1 sec. after the Polygon Motor has been energized. • No Lock signals are detected
C13F0Description: HSYNC detection failure • The SOS falling edge is not detected for 0.2 sec. or more after the Polygon Motor has been energized and laser output started. • No SOS falling edges are detected while VIA remains ON.
C0991Description: Lift 1 ascent motion failure

Konica-Minolta Di251 Common Errors

The most common error codes.

Error
C0B4DDescription: Paper Holding Tray Motor drive malfunction
C0045Description: Cooling Fan Motor malfunction The Lock signal remains HIGH or LOW for a continuous 1-sec. period or more while the Cooling Fan Motor remains energized.
C1300Description: Polygon Motor malfunction • The Lock signal is not detected at any time during a given period of time 1 sec. after the Polygon Motor has been energized. • No Lock signals are detected
C13F0Description: HSYNC detection failure • The SOS falling edge is not detected for 0.2 sec. or more after the Polygon Motor has been energized and laser output started. • No SOS falling edges are detected while VIA remains ON.
C0991Description: Lift 1 ascent motion failure
C0B4DDescription: Paper Holding Tray Motor drive malfunction
C0045Description: Cooling Fan Motor malfunction The Lock signal remains HIGH or LOW for a continuous 1-sec. period or more while the Cooling Fan Motor remains energized.
C1300Description: Polygon Motor malfunction • The Lock signal is not detected at any time during a given period of time 1 sec. after the Polygon Motor has been energized. • No Lock signals are detected
C13F0Description: HSYNC detection failure • The SOS falling edge is not detected for 0.2 sec. or more after the Polygon Motor has been energized and laser output started. • No SOS falling edges are detected while VIA remains ON.
C0991Description: Lift 1 ascent motion failure