Konica-Minolta Di200 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Di200 Top Searches

These results are ranked by popularity.

Error
C0F32Description: Faulty ATDC Sensor The value of data read by the ATDC Sensor is faulty. (ATDC Sensor reading is 19 % or more, or 7 % or less.)
C0650Description: Faulty Scanner Home Position Sensor 1 • The Scanner Home Position Sensor 1 is not unblocked (H) even when the Scanner mov
C0B48Description: Exit Roller/Rolls Spacing Motor drive malfunction
C0F33Description: ATDC adjustment failure • In an F8 (ATDC control voltage automatic adjustment) operation, the adjustment of ATDC control voltage is not completed within 1 min. after the ATDC Sensor sampling. • In an F8 operation, the control voltage falls
C0000Description: Main Motor malfunction The Lock signal remains HIGH for a continuous 1-sec. period while the Main Motor remains energized.

Konica-Minolta Di200 Common Errors

The most common error codes.

Error
C0F32Description: Faulty ATDC Sensor The value of data read by the ATDC Sensor is faulty. (ATDC Sensor reading is 19 % or more, or 7 % or less.)
C0650Description: Faulty Scanner Home Position Sensor 1 • The Scanner Home Position Sensor 1 is not unblocked (H) even when the Scanner mov
C0B48Description: Exit Roller/Rolls Spacing Motor drive malfunction
C0F33Description: ATDC adjustment failure • In an F8 (ATDC control voltage automatic adjustment) operation, the adjustment of ATDC control voltage is not completed within 1 min. after the ATDC Sensor sampling. • In an F8 operation, the control voltage falls
C0000Description: Main Motor malfunction The Lock signal remains HIGH for a continuous 1-sec. period while the Main Motor remains energized.
C0F32Description: Faulty ATDC Sensor The value of data read by the ATDC Sensor is faulty. (ATDC Sensor reading is 19 % or more, or 7 % or less.)
C0650Description: Faulty Scanner Home Position Sensor 1 • The Scanner Home Position Sensor 1 is not unblocked (H) even when the Scanner mov
C0B48Description: Exit Roller/Rolls Spacing Motor drive malfunction
C0F33Description: ATDC adjustment failure • In an F8 (ATDC control voltage automatic adjustment) operation, the adjustment of ATDC control voltage is not completed within 1 min. after the ATDC Sensor sampling. • In an F8 operation, the control voltage falls
C0000Description: Main Motor malfunction The Lock signal remains HIGH for a continuous 1-sec. period while the Main Motor remains energized.