Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Di1611 Top Searches

These results are ranked by popularity.

Error
C1038Description: Engine connection failure Master Board (PWB-A) to Control Board (PWB-C/C) connection failure • There is no acknowledge signal transmitted from the Master Board (PWB-A) to Control Board (PWB-C/C) for 1.5 sec. or more. • An error command sign
C0000Description: Main Motor malfunction • The Main Motor (M1) Lock signal remains HIGH for a continuous 1-sec. period at any time 1 sec. after the Main Motor has started turning.
C0501Description: Warm-up failure 2 (for the model having two Fusing Roller Heater Lamps) • The Fusing Roller Sub Thermistor does not detect a predetermined temperature within 30 sec. after a warm-up cycle has been started and thus the warm-up cycle is not c
C1200Description: Faulty ASIC/memory ASIC/memory (for image and control) fault • A write or read error occurs with SRAM on the Control Board (PWB-C/C). Startup failure • A LOW Polygon Motor (M2) Lock signal is not detected within a given period of time that
C0044Description: ADF Cooling Fan Failure (Only when the optional AFR19 is mounted) • Refer to the option service manual (AFR-19) for details.

Konica-Minolta Di1611 Common Errors

The most common error codes.

Error
C1038Description: Engine connection failure Master Board (PWB-A) to Control Board (PWB-C/C) connection failure • There is no acknowledge signal transmitted from the Master Board (PWB-A) to Control Board (PWB-C/C) for 1.5 sec. or more. • An error command sign
C0000Description: Main Motor malfunction • The Main Motor (M1) Lock signal remains HIGH for a continuous 1-sec. period at any time 1 sec. after the Main Motor has started turning.
C0501Description: Warm-up failure 2 (for the model having two Fusing Roller Heater Lamps) • The Fusing Roller Sub Thermistor does not detect a predetermined temperature within 30 sec. after a warm-up cycle has been started and thus the warm-up cycle is not c
C1200Description: Faulty ASIC/memory ASIC/memory (for image and control) fault • A write or read error occurs with SRAM on the Control Board (PWB-C/C). Startup failure • A LOW Polygon Motor (M2) Lock signal is not detected within a given period of time that
C0044Description: ADF Cooling Fan Failure (Only when the optional AFR19 is mounted) • Refer to the option service manual (AFR-19) for details.
C1038Description: Engine connection failure Master Board (PWB-A) to Control Board (PWB-C/C) connection failure • There is no acknowledge signal transmitted from the Master Board (PWB-A) to Control Board (PWB-C/C) for 1.5 sec. or more. • An error command sign
C0000Description: Main Motor malfunction • The Main Motor (M1) Lock signal remains HIGH for a continuous 1-sec. period at any time 1 sec. after the Main Motor has started turning.
C0501Description: Warm-up failure 2 (for the model having two Fusing Roller Heater Lamps) • The Fusing Roller Sub Thermistor does not detect a predetermined temperature within 30 sec. after a warm-up cycle has been started and thus the warm-up cycle is not c
C1200Description: Faulty ASIC/memory ASIC/memory (for image and control) fault • A write or read error occurs with SRAM on the Control Board (PWB-C/C). Startup failure • A LOW Polygon Motor (M2) Lock signal is not detected within a given period of time that
C0044Description: ADF Cooling Fan Failure (Only when the optional AFR19 is mounted) • Refer to the option service manual (AFR-19) for details.