Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Di1610 Top Searches

These results are ranked by popularity.

Error
C0045Description: Fuser fan motor error • The LOCK signal remains HIGH or LOW continuously for a predetermined period of time while the Cooling Fan Motor remains energized.
C13F0Description: Laser error • The laser output exceeds the upper limit value. • The laser output remains lower than the lower limit value.
C0210Description: H. V. abnormal • The Drum Charge Monitor Voltage (HVC_MON) signal falls outside a predetermined range at any time after the lapse of a predetermined period of time after the Power Switch has been turned ON. • The Image Transfer Voltage Moni
C1468Description: EEPROM error • An EEPROM not written with initial data was detected.
C0500Description: Fuser warm up error • The voltage of the Thermistor remains low for a predetermined period of time when a warm-up cycle is started. • The temperature detected by the Thermistor remains lower than a reference value for a predetermined period

Konica-Minolta Di1610 Common Errors

The most common error codes.

Error
C0045Description: Fuser fan motor error • The LOCK signal remains HIGH or LOW continuously for a predetermined period of time while the Cooling Fan Motor remains energized.
C13F0Description: Laser error • The laser output exceeds the upper limit value. • The laser output remains lower than the lower limit value.
C0210Description: H. V. abnormal • The Drum Charge Monitor Voltage (HVC_MON) signal falls outside a predetermined range at any time after the lapse of a predetermined period of time after the Power Switch has been turned ON. • The Image Transfer Voltage Moni
C1468Description: EEPROM error • An EEPROM not written with initial data was detected.
C0500Description: Fuser warm up error • The voltage of the Thermistor remains low for a predetermined period of time when a warm-up cycle is started. • The temperature detected by the Thermistor remains lower than a reference value for a predetermined period
C0045Description: Fuser fan motor error • The LOCK signal remains HIGH or LOW continuously for a predetermined period of time while the Cooling Fan Motor remains energized.
C13F0Description: Laser error • The laser output exceeds the upper limit value. • The laser output remains lower than the lower limit value.
C0210Description: H. V. abnormal • The Drum Charge Monitor Voltage (HVC_MON) signal falls outside a predetermined range at any time after the lapse of a predetermined period of time after the Power Switch has been turned ON. • The Image Transfer Voltage Moni
C1468Description: EEPROM error • An EEPROM not written with initial data was detected.
C0500Description: Fuser warm up error • The voltage of the Thermistor remains low for a predetermined period of time when a warm-up cycle is started. • The temperature detected by the Thermistor remains lower than a reference value for a predetermined period