Konica-Minolta Di151 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Di151 Top Searches

These results are ranked by popularity.

Error
C133BDescription: Option communications error The Controller Board is not detected within 5 s after the start of a print cycle.
C0000Description: Main Motor’s failure to turn • The Lock signal does not go LOW within 1 s after the motor has been energized. • The Lock signal remains HIGH for continuous 0.1 s or more while the motor remains energized.
C13F0Description: SOS detection failure • During the period 6 s after the Polygon Motor has been energized, a cluster of 56 or more SOS signals output for a 20 ms period is detected five consecutive times. • After the lapse of 6 s after the Polygon Motor has
C0045Description: Fusing Section Cooling Fan Motor’s failure to turn A voltage of 0.3 V or less is detected for a continuous 1 s period while the motor remains energized.
C1468Description: Hardware (EEPROM) malfunction An EEPROM read/write error occurs during the power-on initialization procedure.

Konica-Minolta Di151 Common Errors

The most common error codes.

Error
C133BDescription: Option communications error The Controller Board is not detected within 5 s after the start of a print cycle.
C0000Description: Main Motor’s failure to turn • The Lock signal does not go LOW within 1 s after the motor has been energized. • The Lock signal remains HIGH for continuous 0.1 s or more while the motor remains energized.
C13F0Description: SOS detection failure • During the period 6 s after the Polygon Motor has been energized, a cluster of 56 or more SOS signals output for a 20 ms period is detected five consecutive times. • After the lapse of 6 s after the Polygon Motor has
C0045Description: Fusing Section Cooling Fan Motor’s failure to turn A voltage of 0.3 V or less is detected for a continuous 1 s period while the motor remains energized.
C1468Description: Hardware (EEPROM) malfunction An EEPROM read/write error occurs during the power-on initialization procedure.
C133BDescription: Option communications error The Controller Board is not detected within 5 s after the start of a print cycle.
C0000Description: Main Motor’s failure to turn • The Lock signal does not go LOW within 1 s after the motor has been energized. • The Lock signal remains HIGH for continuous 0.1 s or more while the motor remains energized.
C13F0Description: SOS detection failure • During the period 6 s after the Polygon Motor has been energized, a cluster of 56 or more SOS signals output for a 20 ms period is detected five consecutive times. • After the lapse of 6 s after the Polygon Motor has
C0045Description: Fusing Section Cooling Fan Motor’s failure to turn A voltage of 0.3 V or less is detected for a continuous 1 s period while the motor remains energized.
C1468Description: Hardware (EEPROM) malfunction An EEPROM read/write error occurs during the power-on initialization procedure.