Error |
---|
These results are ranked by popularity.
Error | |
---|---|
C9402 | Description: Exposure LED lighting abnormally The average output value of the CCD sensor with the scanner at its standby position is a predetermined value or more at the end of a scan job. |
C5103 | Description: Transport motor’s turning at abnormal timing The motor lock signal remains LOW for a predetermined continuous period of time while the motor remains stationary. |
C2558 | Description: Abnormally high toner density detected black TCR sensor The TC ratio of the toner determined by the toner replenishment control is detected to be the predetermined value or over for consecutive times. |
C1132 | Description: Punch drive motor’s malfunction
|
C2A12 | Description: Drum unit/M new release failure The status with the new unit is not cleared after the new drum unit is set. |
The most common error codes.
Error | |
---|---|
C9402 | Description: Exposure LED lighting abnormally The average output value of the CCD sensor with the scanner at its standby position is a predetermined value or more at the end of a scan job. |
C5103 | Description: Transport motor’s turning at abnormal timing The motor lock signal remains LOW for a predetermined continuous period of time while the motor remains stationary. |
C2558 | Description: Abnormally high toner density detected black TCR sensor The TC ratio of the toner determined by the toner replenishment control is detected to be the predetermined value or over for consecutive times. |
C1132 | Description: Punch drive motor’s malfunction
|
C2A12 | Description: Drum unit/M new release failure The status with the new unit is not cleared after the new drum unit is set. |
C9402 | Description: Exposure LED lighting abnormally The average output value of the CCD sensor with the scanner at its standby position is a predetermined value or more at the end of a scan job. |
C5103 | Description: Transport motor’s turning at abnormal timing The motor lock signal remains LOW for a predetermined continuous period of time while the motor remains stationary. |
C2558 | Description: Abnormally high toner density detected black TCR sensor The TC ratio of the toner determined by the toner replenishment control is detected to be the predetermined value or over for consecutive times. |
C1132 | Description: Punch drive motor’s malfunction
|
C2A12 | Description: Drum unit/M new release failure The status with the new unit is not cleared after the new drum unit is set. |