Konica-Minolta Bizhub C754 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C754 Top Searches

These results are ranked by popularity.

Error
C2256Description: Developing motor/YMC’s turning at abnormal timingThe motor lock signal remains LOW for a predetermined continuous period of time while the motor remains stationary.
CD020Description: Hard disk verify error. The data abnormality is detected by the HDD verify check.
C1144Description: Stacker plate drive motor’s malfunction • The trailing edge stopper home sensor (PS22) is not blocked or unblocked even after the set period of time has elapsed after the trailing edge stopper motor (M19) is turned
C9402Description: Exposure LED lighting abnormally The average output value of the CCD sensor with the scanner at its standby position is a predetermined value or more at the end of a scan job.
C1080Description: RU communication error When the RU control board (RUCB) is receiving data, a communication error is detected.

Konica-Minolta Bizhub C754 Common Errors

The most common error codes.

Error
C2256Description: Developing motor/YMC’s turning at abnormal timingThe motor lock signal remains LOW for a predetermined continuous period of time while the motor remains stationary.
CD020Description: Hard disk verify error. The data abnormality is detected by the HDD verify check.
C1144Description: Stacker plate drive motor’s malfunction • The trailing edge stopper home sensor (PS22) is not blocked or unblocked even after the set period of time has elapsed after the trailing edge stopper motor (M19) is turned
C9402Description: Exposure LED lighting abnormally The average output value of the CCD sensor with the scanner at its standby position is a predetermined value or more at the end of a scan job.
C1080Description: RU communication error When the RU control board (RUCB) is receiving data, a communication error is detected.
C2256Description: Developing motor/YMC’s turning at abnormal timingThe motor lock signal remains LOW for a predetermined continuous period of time while the motor remains stationary.
CD020Description: Hard disk verify error. The data abnormality is detected by the HDD verify check.
C1144Description: Stacker plate drive motor’s malfunction • The trailing edge stopper home sensor (PS22) is not blocked or unblocked even after the set period of time has elapsed after the trailing edge stopper motor (M19) is turned
C9402Description: Exposure LED lighting abnormally The average output value of the CCD sensor with the scanner at its standby position is a predetermined value or more at the end of a scan job.
C1080Description: RU communication error When the RU control board (RUCB) is receiving data, a communication error is detected.