Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C658 Top Searches

These results are ranked by popularity.

Error
66-11Description: The document registration sensor (PS3) is not turned OFF (blocked) after the set period of time after PS3 is turned ON (unblocked) after the switchback registration started.
C1182Description: Shift motor drive malfunction (When JS-506 is installed) • The tray shift home sensor (PS1) is not turned ON (blocked) after the set period of time has elapsed after the tray shift motor (M1) is turned ON (start of moving to the home positio
99-04Description: The finisher pre-drive is not completed even with a print start command received.
CD252Description: No relay circuit boards for IC-416 mounting at IC-416 mount setting. EFI relay circuit boards (VI-508) are not mounted when the IC-416 is set to mount setting at Service Mode.
C392BDescription: Fusing sensor wire breaks detection (Center of the heating roller). The difference between the temperature corrected by the heating roller thermistor/1 (TH1) and the temperature detected by the heating roller thermistor/2 (TH2) exceeds a pre

Konica-Minolta Bizhub C658 Common Errors

The most common error codes.

Error
66-11Description: The document registration sensor (PS3) is not turned OFF (blocked) after the set period of time after PS3 is turned ON (unblocked) after the switchback registration started.
C1182Description: Shift motor drive malfunction (When JS-506 is installed) • The tray shift home sensor (PS1) is not turned ON (blocked) after the set period of time has elapsed after the tray shift motor (M1) is turned ON (start of moving to the home positio
99-04Description: The finisher pre-drive is not completed even with a print start command received.
CD252Description: No relay circuit boards for IC-416 mounting at IC-416 mount setting. EFI relay circuit boards (VI-508) are not mounted when the IC-416 is set to mount setting at Service Mode.
C392BDescription: Fusing sensor wire breaks detection (Center of the heating roller). The difference between the temperature corrected by the heating roller thermistor/1 (TH1) and the temperature detected by the heating roller thermistor/2 (TH2) exceeds a pre
66-11Description: The document registration sensor (PS3) is not turned OFF (blocked) after the set period of time after PS3 is turned ON (unblocked) after the switchback registration started.
C1182Description: Shift motor drive malfunction (When JS-506 is installed) • The tray shift home sensor (PS1) is not turned ON (blocked) after the set period of time has elapsed after the tray shift motor (M1) is turned ON (start of moving to the home positio
99-04Description: The finisher pre-drive is not completed even with a print start command received.
CD252Description: No relay circuit boards for IC-416 mounting at IC-416 mount setting. EFI relay circuit boards (VI-508) are not mounted when the IC-416 is set to mount setting at Service Mode.
C392BDescription: Fusing sensor wire breaks detection (Center of the heating roller). The difference between the temperature corrected by the heating roller thermistor/1 (TH1) and the temperature detected by the heating roller thermistor/2 (TH2) exceeds a pre