Konica-Minolta Bizhub C654 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C654 Top Searches

These results are ranked by popularity.

Error
C1130Description: 1st stopper motor’s drive malfunction The 1st folding stopper home sensor (PS603) is not turned ON even after the set period of time has elapsed after the 1st stopper motor (M602) starts searching home posit
C2650Description: Main backup media access error • The re-written data, which has been read out, checked and founded as error, is read out again and found as error. • The error was found when reading out the counter value. • MFP detects that the SSD board is
CD203Description: Memory capacity discrepancy 2. File memory capacity on the printer control board (PRCB) is not enough.
C9404Description: CIS LED lighting abnormally After a scan job is completed, the machine detected that the average output of the CIS LED is greater than the specified value.
C5104Description: Transfer belt motor's failure to turn The motor lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.

Konica-Minolta Bizhub C654 Common Errors

The most common error codes.

Error
C1130Description: 1st stopper motor’s drive malfunction The 1st folding stopper home sensor (PS603) is not turned ON even after the set period of time has elapsed after the 1st stopper motor (M602) starts searching home posit
C2650Description: Main backup media access error • The re-written data, which has been read out, checked and founded as error, is read out again and found as error. • The error was found when reading out the counter value. • MFP detects that the SSD board is
CD203Description: Memory capacity discrepancy 2. File memory capacity on the printer control board (PRCB) is not enough.
C9404Description: CIS LED lighting abnormally After a scan job is completed, the machine detected that the average output of the CIS LED is greater than the specified value.
C5104Description: Transfer belt motor's failure to turn The motor lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
C1130Description: 1st stopper motor’s drive malfunction The 1st folding stopper home sensor (PS603) is not turned ON even after the set period of time has elapsed after the 1st stopper motor (M602) starts searching home posit
C2650Description: Main backup media access error • The re-written data, which has been read out, checked and founded as error, is read out again and found as error. • The error was found when reading out the counter value. • MFP detects that the SSD board is
CD203Description: Memory capacity discrepancy 2. File memory capacity on the printer control board (PRCB) is not enough.
C9404Description: CIS LED lighting abnormally After a scan job is completed, the machine detected that the average output of the CIS LED is greater than the specified value.
C5104Description: Transfer belt motor's failure to turn The motor lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.