Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C652DS Top Searches

These results are ranked by popularity.

Error
C6911Description: DSC board mount failure 2 • When MFP detects that DSC board (back side) is not properly installed.
CD004, CD00F, CD020Description: HDD error CD004: Hard disk access error (connection failure) CD00F: Hard disk data transfer error CD020: Hard disk verify error
C3925Description: Fusing sensor wire breaks detection (NC sensor) • At the warm-up stage, the heating roller temperature sensor/1 voltage does not increase by predetermined steps (temperature rise) within a predetermined period of time.
C11B5Description: Saddle stapler drive malfunction • The center stapler home sensor is turned neither ON nor OFF even after the set period of time has elapsed after the center stapler motor is turned ON.
C255ADescription: Magenta TCR sensor adjustment failure

Konica-Minolta Bizhub C652DS Common Errors

The most common error codes.

Error
C6911Description: DSC board mount failure 2 • When MFP detects that DSC board (back side) is not properly installed.
CD004, CD00F, CD020Description: HDD error CD004: Hard disk access error (connection failure) CD00F: Hard disk data transfer error CD020: Hard disk verify error
C3925Description: Fusing sensor wire breaks detection (NC sensor) • At the warm-up stage, the heating roller temperature sensor/1 voltage does not increase by predetermined steps (temperature rise) within a predetermined period of time.
C11B5Description: Saddle stapler drive malfunction • The center stapler home sensor is turned neither ON nor OFF even after the set period of time has elapsed after the center stapler motor is turned ON.
C255ADescription: Magenta TCR sensor adjustment failure
C3925Description: Fusing sensor wire breaks detection (NC sensor) • At the warm-up stage, the heating roller temperature sensor/1 voltage does not increase by predetermined steps (temperature rise) within a predetermined period of time.
C1113Description: Center-staple lead edge stopper motor malfunction • The leading edge stopper home sensor (PS32) is turned neither ON nor OFF even after the set period of time has elapsed after the leading edge stopper motor
C255ADescription: Magenta TCR sensor adjustment failure
C6911Description: DSC board mount failure 2 • When MFP detects that DSC board (back side) is not properly installed.
CD004, CD00F, CD020Description: HDD error CD004: Hard disk access error (connection failure) CD00F: Hard disk data transfer error CD020: Hard disk verify error