Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C650 Top Searches

These results are ranked by popularity.

Error
C1110Description: Stapler R unit drive failure
C4501Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C2160Description: PC charge (C) malfunction • When electrostatic charge output is ON, electrostatic charge leak detection system continues to detect leaks for a predetermined period of time. In this case, C2164 is displayed at the first detection and then af
C2653Description: EEPROM access error (IU Y) • The re-written data, which has been read out, checked and founded as error, is read out again and found as error. • The error was found when reading out the counter value.
C0104Description: Tray 3/4 feeder transportation motor failure to turn • The lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.

Konica-Minolta Bizhub C650 Common Errors

The most common error codes.

Error
C1110Description: Stapler R unit drive failure
C4501Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C2160Description: PC charge (C) malfunction • When electrostatic charge output is ON, electrostatic charge leak detection system continues to detect leaks for a predetermined period of time. In this case, C2164 is displayed at the first detection and then af
C2653Description: EEPROM access error (IU Y) • The re-written data, which has been read out, checked and founded as error, is read out again and found as error. • The error was found when reading out the counter value.
C0104Description: Tray 3/4 feeder transportation motor failure to turn • The lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
C1110Description: Stapler R unit drive failure
C4501Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C2160Description: PC charge (C) malfunction • When electrostatic charge output is ON, electrostatic charge leak detection system continues to detect leaks for a predetermined period of time. In this case, C2164 is displayed at the first detection and then af
C2653Description: EEPROM access error (IU Y) • The re-written data, which has been read out, checked and founded as error, is read out again and found as error. • The error was found when reading out the counter value.
C0104Description: Tray 3/4 feeder transportation motor failure to turn • The lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.