Konica-Minolta Bizhub C552 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C552 Top Searches

These results are ranked by popularity.

Error
C8401Description: EEPROM failure • EEPROM does not access normally
C2653Description: EEPROM access error (IU Y) •The re-written data, which has been read out, checked and founded as error, is read out again and found as error. • The error was found when reading out the counter value.
C2162Description: PC charge (Y) malfunction • When electrostatic charge output is ON, electrostatic charge leak detection system continues to detect leaks for a predetermined period of time. In this case, C2164 is displayed at the first detection and then aft
C4501Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C1133Description: Punch shift motor drive malfunction •The punch shift home sensor (PS605) is not turned ON, or is not turned OFF after it is turned ON, even after the set period of time has elapsed after the punch shift mot

Konica-Minolta Bizhub C552 Common Errors

The most common error codes.

Error
C8401Description: EEPROM failure • EEPROM does not access normally
C2653Description: EEPROM access error (IU Y) •The re-written data, which has been read out, checked and founded as error, is read out again and found as error. • The error was found when reading out the counter value.
C2162Description: PC charge (Y) malfunction • When electrostatic charge output is ON, electrostatic charge leak detection system continues to detect leaks for a predetermined period of time. In this case, C2164 is displayed at the first detection and then aft
C4501Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C1133Description: Punch shift motor drive malfunction •The punch shift home sensor (PS605) is not turned ON, or is not turned OFF after it is turned ON, even after the set period of time has elapsed after the punch shift mot
C8401Description: EEPROM failure • EEPROM does not access normally
C4501Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C2162Description: PC charge (Y) malfunction • When electrostatic charge output is ON, electrostatic charge leak detection system continues to detect leaks for a predetermined period of time. In this case, C2164 is displayed at the first detection and then aft
CD261Description: USB host board failure
C1133Description: Punch shift motor drive malfunction •The punch shift home sensor (PS605) is not turned ON, or is not turned OFF after it is turned ON, even after the set period of time has elapsed after the punch shift mot