Konica-Minolta Bizhub C3851FS Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C3851FS Top Searches

These results are ranked by popularity.

Error
CD211, CD212Description: • CD211: PCI-SDRAM DMA operation failure • CD212: Compression/extraction timeout detection. Trouble detection condition • CD211: Hardware related to the transfer of memory image of the MFP board (MFPB) fails to respond. • CD212: Hardware rel
CA051, CA052, CA053Description: • CA051: Standard controller configuration failure • CA052: Controller hardware error • CA053: Controller start failure. Trouble detection condition • CA051: The controller of the MFP board (MFPB) is faulty. • CA052: A controller hardware er
C3822Description: Fusing abnormally low temperature (TEM2) The fusing temperature sensor/2 (TEM2) continues to detect a temperature lower than a predetermined one for a predetermined period of time after warm-up is complete.
C1403Description: FNS control error A control error is detect at the FS control board.
CC190Description: Outline font load error An error occurred while loading the outline font.

Konica-Minolta Bizhub C3851FS Common Errors

The most common error codes.

Error
CD211, CD212Description: • CD211: PCI-SDRAM DMA operation failure • CD212: Compression/extraction timeout detection. Trouble detection condition • CD211: Hardware related to the transfer of memory image of the MFP board (MFPB) fails to respond. • CD212: Hardware rel
CA051, CA052, CA053Description: • CA051: Standard controller configuration failure • CA052: Controller hardware error • CA053: Controller start failure. Trouble detection condition • CA051: The controller of the MFP board (MFPB) is faulty. • CA052: A controller hardware er
C3822Description: Fusing abnormally low temperature (TEM2) The fusing temperature sensor/2 (TEM2) continues to detect a temperature lower than a predetermined one for a predetermined period of time after warm-up is complete.
C1403Description: FNS control error A control error is detect at the FS control board.
CC190Description: Outline font load error An error occurred while loading the outline font.
CD211, CD212Description: • CD211: PCI-SDRAM DMA operation failure • CD212: Compression/extraction timeout detection. Trouble detection condition • CD211: Hardware related to the transfer of memory image of the MFP board (MFPB) fails to respond. • CD212: Hardware rel
CA051, CA052, CA053Description: • CA051: Standard controller configuration failure • CA052: Controller hardware error • CA053: Controller start failure. Trouble detection condition • CA051: The controller of the MFP board (MFPB) is faulty. • CA052: A controller hardware er
C3822Description: Fusing abnormally low temperature (TEM2) The fusing temperature sensor/2 (TEM2) continues to detect a temperature lower than a predetermined one for a predetermined period of time after warm-up is complete.
C1403Description: FNS control error A control error is detect at the FS control board.
CC190Description: Outline font load error An error occurred while loading the outline font.