Error |
---|
These results are ranked by popularity.
Error | |
---|---|
C3925 | Description: Fusing sensor wire breaks abnormality (TEM1: center) • The maximum value and minimum value of detected temperature of fusing temperature sensor/1 (TEM1: center) is compared after a lapse of given time from starting of warm up and the gap bet |
C2155 | Description: Transfer belt contact fault after K pressure established The 1st transfer pressure sensor (PS9) is turned ON (blocked) after the lamps of given time after the 1st transfer pressure solenoid (SD1) turned OFF when the release operation is fini |
CD271 | Description: i-Option activated and additional memory not installed. While the i-Option is activated, the additional memory included in UK-211 is not installed. |
CC155 | Description: Finisher ROM error |
C2552, C2554 | Description: • C2552: Abnormally high toner density detected cyan TCR sensor • C2554: Abnormally high toner density detected magenta TCR sensor TC ratio in the imaging unit, which is determined by toner replenishing amount control mechanism, is a predete |
The most common error codes.
Error | |
---|---|
C3925 | Description: Fusing sensor wire breaks abnormality (TEM1: center) • The maximum value and minimum value of detected temperature of fusing temperature sensor/1 (TEM1: center) is compared after a lapse of given time from starting of warm up and the gap bet |
C2155 | Description: Transfer belt contact fault after K pressure established The 1st transfer pressure sensor (PS9) is turned ON (blocked) after the lamps of given time after the 1st transfer pressure solenoid (SD1) turned OFF when the release operation is fini |
CD271 | Description: i-Option activated and additional memory not installed. While the i-Option is activated, the additional memory included in UK-211 is not installed. |
CC155 | Description: Finisher ROM error |
C2552, C2554 | Description: • C2552: Abnormally high toner density detected cyan TCR sensor • C2554: Abnormally high toner density detected magenta TCR sensor TC ratio in the imaging unit, which is determined by toner replenishing amount control mechanism, is a predete |
C3925 | Description: Fusing sensor wire breaks abnormality (TEM1: center) • The maximum value and minimum value of detected temperature of fusing temperature sensor/1 (TEM1: center) is compared after a lapse of given time from starting of warm up and the gap bet |
C2155 | Description: Transfer belt contact fault after K pressure established The 1st transfer pressure sensor (PS9) is turned ON (blocked) after the lamps of given time after the 1st transfer pressure solenoid (SD1) turned OFF when the release operation is fini |
CD271 | Description: i-Option activated and additional memory not installed. While the i-Option is activated, the additional memory included in UK-211 is not installed. |
CC155 | Description: Finisher ROM error |
C2552, C2554 | Description: • C2552: Abnormally high toner density detected cyan TCR sensor • C2554: Abnormally high toner density detected magenta TCR sensor TC ratio in the imaging unit, which is determined by toner replenishing amount control mechanism, is a predete |