Konica-Minolta Bizhub C3850 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C3850 Top Searches

These results are ranked by popularity.

Error
C163Description: Faulty destination • The wrong model of firmware is detected in the engine during the initial connection to the engine is being checked. • Hardware signal is not fixed when the Boot started.
3822Description: Fusing abnormally low temperature (Edge of the heating roller) The fusing temperature sensor/2 (TEM2) continues to detect a temperature lower than a predetermined one for a predetermined period of time after warm-up is complete.
2412Description: Imaging unit/M new article release The status with the new unit is not cleared after the new imaging unit is set.
4802Description: Main unit backup data miscompare The replacement of the printer control board is detected.
2559Description: Cyan TCR sensor adjustment failure TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value.

Konica-Minolta Bizhub C3850 Common Errors

The most common error codes.

Error
C163Description: Faulty destination • The wrong model of firmware is detected in the engine during the initial connection to the engine is being checked. • Hardware signal is not fixed when the Boot started.
3822Description: Fusing abnormally low temperature (Edge of the heating roller) The fusing temperature sensor/2 (TEM2) continues to detect a temperature lower than a predetermined one for a predetermined period of time after warm-up is complete.
2412Description: Imaging unit/M new article release The status with the new unit is not cleared after the new imaging unit is set.
4802Description: Main unit backup data miscompare The replacement of the printer control board is detected.
2559Description: Cyan TCR sensor adjustment failure TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value.
C163Description: Faulty destination • The wrong model of firmware is detected in the engine during the initial connection to the engine is being checked. • Hardware signal is not fixed when the Boot started.
3822Description: Fusing abnormally low temperature (Edge of the heating roller) The fusing temperature sensor/2 (TEM2) continues to detect a temperature lower than a predetermined one for a predetermined period of time after warm-up is complete.
2412Description: Imaging unit/M new article release The status with the new unit is not cleared after the new imaging unit is set.
4802Description: Main unit backup data miscompare The replacement of the printer control board is detected.
2559Description: Cyan TCR sensor adjustment failure TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value.