Select an Error Code or Type an Error Code to begin searching
Error
Konica-Minolta Bizhub C368 Top Searches
These results are ranked by popularity.
Error
C1182
Description: Shift motor drive malfunction (When JS-506 is installed) • The tray shift home sensor (PS1) is not turned ON (blocked) after the set period of time has elapsed after the tray shift motor (M1) is turned ON (start of moving to the home positio
CA051, CA052, CA053
Description: • CA051: Standard controller configuration failure • CA052: Controller hardware error • CA053: Controller start failure. • CA051: The controller of the MFP board (MFPB) is faulty. • CA052: A controller hardware error is detected in the netwo
66-11
Description: The document registration sensor (PS3) is not turned OFF (blocked) after the set period of time after PS3 is turned ON (unblocked) after the switchback registration started.
CD252
Description: No relay circuit boards for IC-416 mounting at IC-416 mount setting. EFI relay circuit boards (VI-508) are not mounted when the IC-416 is set to mount setting at Service Mode.
99-04
Description: The finisher pre-drive is not completed even with a print start command received.
Konica-Minolta Bizhub C368 Common Errors
The most common error codes.
Error
C1182
Description: Shift motor drive malfunction (When JS-506 is installed) • The tray shift home sensor (PS1) is not turned ON (blocked) after the set period of time has elapsed after the tray shift motor (M1) is turned ON (start of moving to the home positio
CA051, CA052, CA053
Description: • CA051: Standard controller configuration failure • CA052: Controller hardware error • CA053: Controller start failure. • CA051: The controller of the MFP board (MFPB) is faulty. • CA052: A controller hardware error is detected in the netwo
66-11
Description: The document registration sensor (PS3) is not turned OFF (blocked) after the set period of time after PS3 is turned ON (unblocked) after the switchback registration started.
CD252
Description: No relay circuit boards for IC-416 mounting at IC-416 mount setting. EFI relay circuit boards (VI-508) are not mounted when the IC-416 is set to mount setting at Service Mode.
99-04
Description: The finisher pre-drive is not completed even with a print start command received.
C1182
Description: Shift motor drive malfunction (When JS-506 is installed) • The tray shift home sensor (PS1) is not turned ON (blocked) after the set period of time has elapsed after the tray shift motor (M1) is turned ON (start of moving to the home positio
CA051, CA052, CA053
Description: • CA051: Standard controller configuration failure • CA052: Controller hardware error • CA053: Controller start failure. • CA051: The controller of the MFP board (MFPB) is faulty. • CA052: A controller hardware error is detected in the netwo
66-11
Description: The document registration sensor (PS3) is not turned OFF (blocked) after the set period of time after PS3 is turned ON (unblocked) after the switchback registration started.
CD252
Description: No relay circuit boards for IC-416 mounting at IC-416 mount setting. EFI relay circuit boards (VI-508) are not mounted when the IC-416 is set to mount setting at Service Mode.
99-04
Description: The finisher pre-drive is not completed even with a print start command received.