Konica-Minolta Bizhub C353P Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C353P Top Searches

These results are ranked by popularity.

Error
C9402Description: Exposure turning on the lamp abnormally detection • The average output value of the CCD sensor with the scanner at its standby position is a predetermined value or more at the end of a scan job.
C11D0Description: Crease motor drive failure
C3302Description: Fusing cooling fan motor/ 2,3 failure to turn • The fan motor lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
CC163Description: ROM contents error (PRT) • The wrong model of firmware is detected in the engine during the initial connection to the engine is being checked.
C4553Description: Laser malfunction (Y)

Konica-Minolta Bizhub C353P Common Errors

The most common error codes.

Error
C9402Description: Exposure turning on the lamp abnormally detection • The average output value of the CCD sensor with the scanner at its standby position is a predetermined value or more at the end of a scan job.
C11D0Description: Crease motor drive failure
C3302Description: Fusing cooling fan motor/ 2,3 failure to turn • The fan motor lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
CC163Description: ROM contents error (PRT) • The wrong model of firmware is detected in the engine during the initial connection to the engine is being checked.
C4553Description: Laser malfunction (Y)
C9402Description: Exposure turning on the lamp abnormally detection • The average output value of the CCD sensor with the scanner at its standby position is a predetermined value or more at the end of a scan job.
C11D0Description: Crease motor drive failure
C3302Description: Fusing cooling fan motor/ 2,3 failure to turn • The fan motor lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
CC163Description: ROM contents error (PRT) • The wrong model of firmware is detected in the engine during the initial connection to the engine is being checked.
C4553Description: Laser malfunction (Y)