Konica-Minolta Bizhub C352 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C352 Top Searches

These results are ranked by popularity.

Error
C2551Description: Abnormally low toner density detected cyan TCR sensor • TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 5 % or less for a given number of times consecutively.
C0209Description: LCT elevator motor malfunction (elevator malfunction)
C9401Description: Exposure lamp’s failure to turn ON • The output from the CCD sensor is a predetermined value or less during CCD sensor gain adjustment.
C4151Description: Polygon motor/C failure to turn • The polygon motor fails to turn stably even after the lapse of a given period of time after activating the polygon motor. • Motor lock signal detects HIGH for a given period time consecutively during the
C11A0Description: Paper holding drive failure

Konica-Minolta Bizhub C352 Common Errors

The most common error codes.

Error
C2551Description: Abnormally low toner density detected cyan TCR sensor • TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 5 % or less for a given number of times consecutively.
C0209Description: LCT elevator motor malfunction (elevator malfunction)
C9401Description: Exposure lamp’s failure to turn ON • The output from the CCD sensor is a predetermined value or less during CCD sensor gain adjustment.
C4151Description: Polygon motor/C failure to turn • The polygon motor fails to turn stably even after the lapse of a given period of time after activating the polygon motor. • Motor lock signal detects HIGH for a given period time consecutively during the
C11A0Description: Paper holding drive failure
C2551Description: Abnormally low toner density detected cyan TCR sensor • TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 5 % or less for a given number of times consecutively.
C0209Description: LCT elevator motor malfunction (elevator malfunction)
C9401Description: Exposure lamp’s failure to turn ON • The output from the CCD sensor is a predetermined value or less during CCD sensor gain adjustment.
C4151Description: Polygon motor/C failure to turn • The polygon motor fails to turn stably even after the lapse of a given period of time after activating the polygon motor. • Motor lock signal detects HIGH for a given period time consecutively during the
C11A0Description: Paper holding drive failure