| Error |
|---|
These results are ranked by popularity.
| Error | |
|---|---|
| C5354 | Description: Ozone Ventilation Fan Motor's failure to turn • The Fan Lock signal remains HIGH for a predetermined continuous period of time while the Motor remains stationary. |
| C255A | Description: Magenta TCR Sensor adjustment failure |
| C11C2 | Description: Finishing option Punch Unit Board malfunction |
| C3101 | Description: Fusing Pressure Roller pressure/retraction failure • No change is observed in the encoder sensor pulse even after the lapse of 0.5 sec. after the Fusing Pressure/Retraction Motor has started turning for a sequence of the Fusing Pressure Rol |
| C2164 | Description: PC Drum Charge Corona malfunction • The SCD signal is detected for a continuous 0.5sec. period while the PC Drum Charge Corona is being energized. |
The most common error codes.
| Error | |
|---|---|
| C5354 | Description: Ozone Ventilation Fan Motor's failure to turn • The Fan Lock signal remains HIGH for a predetermined continuous period of time while the Motor remains stationary. |
| C255A | Description: Magenta TCR Sensor adjustment failure |
| C11C2 | Description: Finishing option Punch Unit Board malfunction |
| C3101 | Description: Fusing Pressure Roller pressure/retraction failure • No change is observed in the encoder sensor pulse even after the lapse of 0.5 sec. after the Fusing Pressure/Retraction Motor has started turning for a sequence of the Fusing Pressure Rol |
| C2164 | Description: PC Drum Charge Corona malfunction • The SCD signal is detected for a continuous 0.5sec. period while the PC Drum Charge Corona is being energized. |
| C5354 | Description: Ozone Ventilation Fan Motor's failure to turn • The Fan Lock signal remains HIGH for a predetermined continuous period of time while the Motor remains stationary. |
| C255A | Description: Magenta TCR Sensor adjustment failure |
| C11C2 | Description: Finishing option Punch Unit Board malfunction |
| C3101 | Description: Fusing Pressure Roller pressure/retraction failure • No change is observed in the encoder sensor pulse even after the lapse of 0.5 sec. after the Fusing Pressure/Retraction Motor has started turning for a sequence of the Fusing Pressure Rol |
| C2164 | Description: PC Drum Charge Corona malfunction • The SCD signal is detected for a continuous 0.5sec. period while the PC Drum Charge Corona is being energized. |