Konica-Minolta Bizhub C3350 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C3350 Top Searches

These results are ranked by popularity.

Error
6790Description: AFE offset adjustment error During the offset adjustment, the offset value does not fall within the predetermined range a total of three times including retries.
2A23Description: Toner cartridge/Y new release failure The status with the new cartridge is not cleared after the new toner cartridge is set.
C164Description: ROM contents error (MSC) The wrong model of firmware is detected in the MFP board when the main power switch is turned ON.
3826Description: Fusing abnormally low temperature (Center of the heating roller) The fusing temperature sensor/1 (TEM1: center of the heating side) continues to detect a temperature lower than a predetermined one for a predetermined period of time after war
2413Description: Imaging unit/Y new article release The status with the new unit is not cleared after the new imaging unit is set.

Konica-Minolta Bizhub C3350 Common Errors

The most common error codes.

Error
6790Description: AFE offset adjustment error During the offset adjustment, the offset value does not fall within the predetermined range a total of three times including retries.
2A23Description: Toner cartridge/Y new release failure The status with the new cartridge is not cleared after the new toner cartridge is set.
C164Description: ROM contents error (MSC) The wrong model of firmware is detected in the MFP board when the main power switch is turned ON.
3826Description: Fusing abnormally low temperature (Center of the heating roller) The fusing temperature sensor/1 (TEM1: center of the heating side) continues to detect a temperature lower than a predetermined one for a predetermined period of time after war
2413Description: Imaging unit/Y new article release The status with the new unit is not cleared after the new imaging unit is set.
6790Description: AFE offset adjustment error During the offset adjustment, the offset value does not fall within the predetermined range a total of three times including retries.
2A23Description: Toner cartridge/Y new release failure The status with the new cartridge is not cleared after the new toner cartridge is set.
C164Description: ROM contents error (MSC) The wrong model of firmware is detected in the MFP board when the main power switch is turned ON.
3826Description: Fusing abnormally low temperature (Center of the heating roller) The fusing temperature sensor/1 (TEM1: center of the heating side) continues to detect a temperature lower than a predetermined one for a predetermined period of time after war
2413Description: Imaging unit/Y new article release The status with the new unit is not cleared after the new imaging unit is set.