Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C3100P Top Searches

These results are ranked by popularity.

Error
13C5Description: Imaging unit/M new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set.
4092Description: Interface communication error Correct communication is failed when receiving/sending the command between MFPB and PRCB.
C015Description: BOOT ROM error at startup Boot ROM error is detected during printer start-up.
0010Description: Color PC drum motor malfunction • The color PC drum motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the
0500Description: Heating roller warm-up failure The thermistor/1 does not detect the specified temperature and the warm-up cycle is not completed even after the lapse of a given period of time after the cycle has been started.

Konica-Minolta Bizhub C3100P Common Errors

The most common error codes.

Error
13C5Description: Imaging unit/M new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set.
4092Description: Interface communication error Correct communication is failed when receiving/sending the command between MFPB and PRCB.
C015Description: BOOT ROM error at startup Boot ROM error is detected during printer start-up.
0010Description: Color PC drum motor malfunction • The color PC drum motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the
0500Description: Heating roller warm-up failure The thermistor/1 does not detect the specified temperature and the warm-up cycle is not completed even after the lapse of a given period of time after the cycle has been started.
13C5Description: Imaging unit/M new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set.
4092Description: Interface communication error Correct communication is failed when receiving/sending the command between MFPB and PRCB.
C015Description: BOOT ROM error at startup Boot ROM error is detected during printer start-up.
0010Description: Color PC drum motor malfunction • The color PC drum motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the
0500Description: Heating roller warm-up failure The thermistor/1 does not detect the specified temperature and the warm-up cycle is not completed even after the lapse of a given period of time after the cycle has been started.