Konica-Minolta Bizhub C308 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C308 Top Searches

These results are ranked by popularity.

Error
CD252Description: No relay circuit boards for IC-416 mounting at IC-416 mount setting. EFI relay circuit boards (VI-508) are not mounted when the IC-416 is set to mount setting at Service Mode.
66-11Description: The document registration sensor (PS3) is not turned OFF (blocked) after the set period of time after PS3 is turned ON (unblocked) after the switchback registration started.
CA051, CA052, CA053Description: • CA051: Standard controller configuration failure • CA052: Controller hardware error • CA053: Controller start failure. • CA051: The controller of the MFP board (MFPB) is faulty. • CA052: A controller hardware error is detected in the netwo
99-04Description: The finisher pre-drive is not completed even with a print start command received.
C392BDescription: Fusing sensor wire breaks detection (Center of the heating roller). The difference between the temperature corrected by the heating roller thermistor/1 (TH1) and the temperature detected by the heating roller thermistor/2 (TH2) exceeds a pre

Konica-Minolta Bizhub C308 Common Errors

The most common error codes.

Error
CD252Description: No relay circuit boards for IC-416 mounting at IC-416 mount setting. EFI relay circuit boards (VI-508) are not mounted when the IC-416 is set to mount setting at Service Mode.
66-11Description: The document registration sensor (PS3) is not turned OFF (blocked) after the set period of time after PS3 is turned ON (unblocked) after the switchback registration started.
CA051, CA052, CA053Description: • CA051: Standard controller configuration failure • CA052: Controller hardware error • CA053: Controller start failure. • CA051: The controller of the MFP board (MFPB) is faulty. • CA052: A controller hardware error is detected in the netwo
99-04Description: The finisher pre-drive is not completed even with a print start command received.
C392BDescription: Fusing sensor wire breaks detection (Center of the heating roller). The difference between the temperature corrected by the heating roller thermistor/1 (TH1) and the temperature detected by the heating roller thermistor/2 (TH2) exceeds a pre
CD252Description: No relay circuit boards for IC-416 mounting at IC-416 mount setting. EFI relay circuit boards (VI-508) are not mounted when the IC-416 is set to mount setting at Service Mode.
66-11Description: The document registration sensor (PS3) is not turned OFF (blocked) after the set period of time after PS3 is turned ON (unblocked) after the switchback registration started.
CA051, CA052, CA053Description: • CA051: Standard controller configuration failure • CA052: Controller hardware error • CA053: Controller start failure. • CA051: The controller of the MFP board (MFPB) is faulty. • CA052: A controller hardware error is detected in the netwo
99-04Description: The finisher pre-drive is not completed even with a print start command received.
C392BDescription: Fusing sensor wire breaks detection (Center of the heating roller). The difference between the temperature corrected by the heating roller thermistor/1 (TH1) and the temperature detected by the heating roller thermistor/2 (TH2) exceeds a pre