Konica-Minolta Bizhub C300i Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C300i Top Searches

These results are ranked by popularity.

Error
C6751Description: CCD clamp/gain adjustment failure • The adjustment value is 0 or 255 during a CCD clamp adjustment. • The peak value of the output data is 64 or less during a CCD gain adjustment.
CED01Description: The authentication application information does not exist in the storage in the enhanced server authentication state. With “Enhanced Server Authentication” set, no authentication application registration information is found in the storage.
C2A11 ... C2A14Description: • C2A11: Drum unit/C new release failure • C2A12: Drum unit/M new release failure • C2A13: Drum unit/Y new release failure • C2A14: Drum unit/K new release failure The status with the new unit is not cleared after the new drum unit is set.
CD211, CD212Description: • CD211: PCI-SDRAM DMA operation failure • CD212: Compression/extraction timeout detection • CD211: Hardware related to the transfer of memory image of the CPU board (CPUB) fails to respond. • CD212: Hardware related to the BTC compression f
C1113Description: Stopper drive motor malfunction The stopper home sensor (PS6) is not turned OFF (unblocked) or ON (blocked) even after the set period of time has elapsed after the stopper drive motor (M4) is turned ON.

Konica-Minolta Bizhub C300i Common Errors

The most common error codes.

Error
C6751Description: CCD clamp/gain adjustment failure • The adjustment value is 0 or 255 during a CCD clamp adjustment. • The peak value of the output data is 64 or less during a CCD gain adjustment.
CED01Description: The authentication application information does not exist in the storage in the enhanced server authentication state. With “Enhanced Server Authentication” set, no authentication application registration information is found in the storage.
C2A11 ... C2A14Description: • C2A11: Drum unit/C new release failure • C2A12: Drum unit/M new release failure • C2A13: Drum unit/Y new release failure • C2A14: Drum unit/K new release failure The status with the new unit is not cleared after the new drum unit is set.
CD211, CD212Description: • CD211: PCI-SDRAM DMA operation failure • CD212: Compression/extraction timeout detection • CD211: Hardware related to the transfer of memory image of the CPU board (CPUB) fails to respond. • CD212: Hardware related to the BTC compression f
C1113Description: Stopper drive motor malfunction The stopper home sensor (PS6) is not turned OFF (unblocked) or ON (blocked) even after the set period of time has elapsed after the stopper drive motor (M4) is turned ON.
C6751Description: CCD clamp/gain adjustment failure • The adjustment value is 0 or 255 during a CCD clamp adjustment. • The peak value of the output data is 64 or less during a CCD gain adjustment.
CED01Description: The authentication application information does not exist in the storage in the enhanced server authentication state. With “Enhanced Server Authentication” set, no authentication application registration information is found in the storage.
C2A11 ... C2A14Description: • C2A11: Drum unit/C new release failure • C2A12: Drum unit/M new release failure • C2A13: Drum unit/Y new release failure • C2A14: Drum unit/K new release failure The status with the new unit is not cleared after the new drum unit is set.
CD211, CD212Description: • CD211: PCI-SDRAM DMA operation failure • CD212: Compression/extraction timeout detection • CD211: Hardware related to the transfer of memory image of the CPU board (CPUB) fails to respond. • CD212: Hardware related to the BTC compression f
C1113Description: Stopper drive motor malfunction The stopper home sensor (PS6) is not turned OFF (unblocked) or ON (blocked) even after the set period of time has elapsed after the stopper drive motor (M4) is turned ON.