Konica-Minolta Bizhub C300 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C300 Top Searches

These results are ranked by popularity.

Error
C2152Description: Transfer belt separation • The 1st image transfer pressure/retraction position sensor doesn’t turn ON (retracting) even after the lapse of a given period of time after the 1st image transfer pressure/retraction clutch has turned ON during
C8101Description: Pressure/retraction mechanism failure before image reading See DF-608
C3452Description: Press. heater trouble • When the warm up started, if the temperature detected by the fusing pressure roller thermistor/1 (TH2) is at the specified value or under, and lower than the temperature detected by the heating roller thermistor/1 (
CB001 ... CB119Description: FAX Board Error
C4552Description: Laser malfunction (magenta)

Konica-Minolta Bizhub C300 Common Errors

The most common error codes.

Error
C2152Description: Transfer belt separation • The 1st image transfer pressure/retraction position sensor doesn’t turn ON (retracting) even after the lapse of a given period of time after the 1st image transfer pressure/retraction clutch has turned ON during
C8101Description: Pressure/retraction mechanism failure before image reading See DF-608
C3452Description: Press. heater trouble • When the warm up started, if the temperature detected by the fusing pressure roller thermistor/1 (TH2) is at the specified value or under, and lower than the temperature detected by the heating roller thermistor/1 (
CB001 ... CB119Description: FAX Board Error
C4552Description: Laser malfunction (magenta)
C2152Description: Transfer belt separation • The 1st image transfer pressure/retraction position sensor doesn’t turn ON (retracting) even after the lapse of a given period of time after the 1st image transfer pressure/retraction clutch has turned ON during
C8101Description: Pressure/retraction mechanism failure before image reading See DF-608
C3452Description: Press. heater trouble • When the warm up started, if the temperature detected by the fusing pressure roller thermistor/1 (TH2) is at the specified value or under, and lower than the temperature detected by the heating roller thermistor/1 (
CB001 ... CB119Description: FAX Board Error
C4552Description: Laser malfunction (magenta)