Error |
---|
These results are ranked by popularity.
Error | |
---|---|
C11A1 | Description: Exit roller pressure/ retraction malfunction (When FS-533 is installed) The pick up roller position sensor (PS105) is not turned ON (blocked) or OFF (unblocked) even after the set period of time has elapsed after the exit roller lift up moto |
C8107 | Description: Glass cleaning mechanism trouble (When DF-628 is installed) The original reading glass cleaning sensor (PS12) is not turned ON after the set period of time has elapsed after the glass cleaning motor (M4) is turned ON. |
C3302 | Description: Paper cooling fan failure to turn. The fan lock signal remains HIGH for a predetermined continuous period of time while the fan is turning. |
CD211, CD212 | Description: • CD211: PCI-SDRAM DMA operation failure • CD212: Compression/extraction timeout detection |
99-08 | Description: The finisher does not accept a print start command. |
The most common error codes.
Error | |
---|---|
C11A1 | Description: Exit roller pressure/ retraction malfunction (When FS-533 is installed) The pick up roller position sensor (PS105) is not turned ON (blocked) or OFF (unblocked) even after the set period of time has elapsed after the exit roller lift up moto |
C8107 | Description: Glass cleaning mechanism trouble (When DF-628 is installed) The original reading glass cleaning sensor (PS12) is not turned ON after the set period of time has elapsed after the glass cleaning motor (M4) is turned ON. |
C3302 | Description: Paper cooling fan failure to turn. The fan lock signal remains HIGH for a predetermined continuous period of time while the fan is turning. |
CD211, CD212 | Description: • CD211: PCI-SDRAM DMA operation failure • CD212: Compression/extraction timeout detection |
99-08 | Description: The finisher does not accept a print start command. |
CD211, CD212 | Description: • CD211: PCI-SDRAM DMA operation failure • CD212: Compression/extraction timeout detection |
S-1 | Description: It is detected that the CCD clamp gain adjustment value is faulty. |
C8107 | Description: Glass cleaning mechanism trouble (When DF-628 is installed) The original reading glass cleaning sensor (PS12) is not turned ON after the set period of time has elapsed after the glass cleaning motor (M4) is turned ON. |
C3302 | Description: Paper cooling fan failure to turn. The fan lock signal remains HIGH for a predetermined continuous period of time while the fan is turning. |
C11A1 | Description: Exit roller pressure/ retraction malfunction (When FS-533 is installed) The pick up roller position sensor (PS105) is not turned ON (blocked) or OFF (unblocked) even after the set period of time has elapsed after the exit roller lift up moto |