Error |
---|
These results are ranked by popularity.
Error | |
---|---|
CC001 | Description: Vendor connection failure • It is detected that communications with the vendor are interrupted for a given period of time or more with “Installed” selected for the setting of vendor installation. |
C5102 | Description: Transport motor’s failure to turn • The motor lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary. |
C2555 | Description: Abnormally low toner density detected yellow TCR sensor • When sampling data is determined in TC ratio calculation control, TCR sensor output is higher than a predetermined value for a predetermined number of times in a row even though the |
C11A1 | Description: Tray 2 exit roller pressure/ retraction malfunction
|
C6704 | Description: Image input time out • Image data is not input from the CCD board (CCDB) to the MFP board (MFPB). |
The most common error codes.
Error | |
---|---|
CC001 | Description: Vendor connection failure • It is detected that communications with the vendor are interrupted for a given period of time or more with “Installed” selected for the setting of vendor installation. |
C5102 | Description: Transport motor’s failure to turn • The motor lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary. |
C2555 | Description: Abnormally low toner density detected yellow TCR sensor • When sampling data is determined in TC ratio calculation control, TCR sensor output is higher than a predetermined value for a predetermined number of times in a row even though the |
C11A1 | Description: Tray 2 exit roller pressure/ retraction malfunction
|
C6704 | Description: Image input time out • Image data is not input from the CCD board (CCDB) to the MFP board (MFPB). |
CC001 | Description: Vendor connection failure • It is detected that communications with the vendor are interrupted for a given period of time or more with “Installed” selected for the setting of vendor installation. |
C5102 | Description: Transport motor’s failure to turn • The motor lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary. |
C2555 | Description: Abnormally low toner density detected yellow TCR sensor • When sampling data is determined in TC ratio calculation control, TCR sensor output is higher than a predetermined value for a predetermined number of times in a row even though the |
C11A1 | Description: Tray 2 exit roller pressure/ retraction malfunction
|
C6704 | Description: Image input time out • Image data is not input from the CCD board (CCDB) to the MFP board (MFPB). |