Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C252P Top Searches

These results are ranked by popularity.

Error
CA053Description: Controller start failure • A controller start failure is detected in the controller interface.
C3852Description: Abnormal Low Temp. (Press) • The temperature of the Fusing Pressure Roller Thermistor /1 (TH2) is lower than a given level of degree for 1 second or more uninterruptedly during Ready mode, Low Power mode or printing.
C2254Description: Color PC Drum Motor's turning at abnormal timing • The Motor Lock signal remains LOW for a predetermined continuous period of time while the Motor remains stationary.
C0206Description: Tray 3 Elevator failure
C2558Description: Abnormally high toner density detected Black TCR Sensor • TC ratio in the developing machine, which is determined by Toner replenishing amount control mechanism, is 12 % or more for a given number of times consecutively.

Konica-Minolta Bizhub C252P Common Errors

The most common error codes.

Error
CA053Description: Controller start failure • A controller start failure is detected in the controller interface.
C3852Description: Abnormal Low Temp. (Press) • The temperature of the Fusing Pressure Roller Thermistor /1 (TH2) is lower than a given level of degree for 1 second or more uninterruptedly during Ready mode, Low Power mode or printing.
C2254Description: Color PC Drum Motor's turning at abnormal timing • The Motor Lock signal remains LOW for a predetermined continuous period of time while the Motor remains stationary.
C0206Description: Tray 3 Elevator failure
C2558Description: Abnormally high toner density detected Black TCR Sensor • TC ratio in the developing machine, which is determined by Toner replenishing amount control mechanism, is 12 % or more for a given number of times consecutively.
CA053Description: Controller start failure • A controller start failure is detected in the controller interface.
C3852Description: Abnormal Low Temp. (Press) • The temperature of the Fusing Pressure Roller Thermistor /1 (TH2) is lower than a given level of degree for 1 second or more uninterruptedly during Ready mode, Low Power mode or printing.
C2254Description: Color PC Drum Motor's turning at abnormal timing • The Motor Lock signal remains LOW for a predetermined continuous period of time while the Motor remains stationary.
C0206Description: Tray 3 Elevator failure
C2558Description: Abnormally high toner density detected Black TCR Sensor • TC ratio in the developing machine, which is determined by Toner replenishing amount control mechanism, is 12 % or more for a given number of times consecutively.