Konica-Minolta Bizhub C227 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C227 Top Searches

These results are ranked by popularity.

Error
C2558Description: Abnormally high toner density detected black TCR sensor. The TC ratio of the toner determined by the toner replenishment control is detected to be the predetermined value or over for consecutive times.
C1115Description: Center-staple knife drive motor malfunction (When FS-534SD is installed) The center fold knife home sensor (PS8) is not turned ON (blocked) or OFF (unblocked) even after the set period of time has elapsed after the center fold knife motor (M
CD392Description: Nonvolatile data save error (EEPROM) The EEPROM is replaced with a new one.
92-40Description: For the second-side feed of paper in the duplex mode, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output.
CC15BDescription: Flash ROM error (saddle) (When FS-534SD is installed) Data of flash ROM of the saddle is determined to be faulty when the main power switch is turned ON.

Konica-Minolta Bizhub C227 Common Errors

The most common error codes.

Error
C2558Description: Abnormally high toner density detected black TCR sensor. The TC ratio of the toner determined by the toner replenishment control is detected to be the predetermined value or over for consecutive times.
C1115Description: Center-staple knife drive motor malfunction (When FS-534SD is installed) The center fold knife home sensor (PS8) is not turned ON (blocked) or OFF (unblocked) even after the set period of time has elapsed after the center fold knife motor (M
CD392Description: Nonvolatile data save error (EEPROM) The EEPROM is replaced with a new one.
92-40Description: For the second-side feed of paper in the duplex mode, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output.
CC15BDescription: Flash ROM error (saddle) (When FS-534SD is installed) Data of flash ROM of the saddle is determined to be faulty when the main power switch is turned ON.
C2558Description: Abnormally high toner density detected black TCR sensor. The TC ratio of the toner determined by the toner replenishment control is detected to be the predetermined value or over for consecutive times.
C1115Description: Center-staple knife drive motor malfunction (When FS-534SD is installed) The center fold knife home sensor (PS8) is not turned ON (blocked) or OFF (unblocked) even after the set period of time has elapsed after the center fold knife motor (M
CD392Description: Nonvolatile data save error (EEPROM) The EEPROM is replaced with a new one.
92-40Description: For the second-side feed of paper in the duplex mode, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output.
CC15BDescription: Flash ROM error (saddle) (When FS-534SD is installed) Data of flash ROM of the saddle is determined to be faulty when the main power switch is turned ON.