Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C224e Top Searches

These results are ranked by popularity.

Error
C1114Description: Center-staple front adjust drive motor malfunction The alignment home sensor (PS4) is not blocked or unblocked even after the set period of time has elapsed after the alignment motor (M3) is turned ON.
CD004 ... CD047Description: Hard disk error
C255ADescription: Magenta TCR sensor adjustment failure TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value.
C5501Description: AC signal abnormality The zero cross signal is not input during fusing phase control.
C2A14Description: Drum unit/K new release failure The status with the new unit is not cleared after the new drum unit is set.

Konica-Minolta Bizhub C224e Common Errors

The most common error codes.

Error
C1114Description: Center-staple front adjust drive motor malfunction The alignment home sensor (PS4) is not blocked or unblocked even after the set period of time has elapsed after the alignment motor (M3) is turned ON.
CD004 ... CD047Description: Hard disk error
C255ADescription: Magenta TCR sensor adjustment failure TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value.
C5501Description: AC signal abnormality The zero cross signal is not input during fusing phase control.
C2A14Description: Drum unit/K new release failure The status with the new unit is not cleared after the new drum unit is set.
C1114Description: Center-staple front adjust drive motor malfunction The alignment home sensor (PS4) is not blocked or unblocked even after the set period of time has elapsed after the alignment motor (M3) is turned ON.
CD004 ... CD047Description: Hard disk error
C255ADescription: Magenta TCR sensor adjustment failure TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value.
C5501Description: AC signal abnormality The zero cross signal is not input during fusing phase control.
C2A14Description: Drum unit/K new release failure The status with the new unit is not cleared after the new drum unit is set.