Konica-Minolta Bizhub C203 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C203 Top Searches

These results are ranked by popularity.

Error
C3101Description: Fusing roller separation failure • With the fusing roller being retracted, the pulse of the fusing roller retraction sensor does not change even after the specified period of time has passed after the fusing retraction motor started rotati
C11D0Description: Crease motor drive failure
C6751Description: CCD clamp/gain adjustment failure • The adjustment value is 0 or 255 during a CCD clamp adjustment. • The peak value of the output data is 64 or less during a CCD gain adjustment.
C0214Description: LCT shifting failure
CA053Description: Controller start failure • A controller start failure is detected in the controller interface.

Konica-Minolta Bizhub C203 Common Errors

The most common error codes.

Error
C3101Description: Fusing roller separation failure • With the fusing roller being retracted, the pulse of the fusing roller retraction sensor does not change even after the specified period of time has passed after the fusing retraction motor started rotati
C11D0Description: Crease motor drive failure
C6751Description: CCD clamp/gain adjustment failure • The adjustment value is 0 or 255 during a CCD clamp adjustment. • The peak value of the output data is 64 or less during a CCD gain adjustment.
C0214Description: LCT shifting failure
CA053Description: Controller start failure • A controller start failure is detected in the controller interface.
C3101Description: Fusing roller separation failure • With the fusing roller being retracted, the pulse of the fusing roller retraction sensor does not change even after the specified period of time has passed after the fusing retraction motor started rotati
C11D0Description: Crease motor drive failure
C6751Description: CCD clamp/gain adjustment failure • The adjustment value is 0 or 255 during a CCD clamp adjustment. • The peak value of the output data is 64 or less during a CCD gain adjustment.
C0214Description: LCT shifting failure
CA053Description: Controller start failure • A controller start failure is detected in the controller interface.