Konica-Minolta Bizhub C200e Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C200e Top Searches

These results are ranked by popularity.

Error
C5102Description: Transport motor’s failure to turn • The motor lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
C2559Description: Cyan TCR sensor adjustment failure • TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value.
C2A03Description: EEPROM access error (TC Y) • An error was found when reading or writing data. • The error was found when reading out the counter value.
C0215Description: LCT shift motor malfunction
C3821Description: Fusing abnormally low temperature detection (heating side) • The heating roller thermistor continues to detect a temperature lower than a predetermined one for a predetermined period of time. • In the states other than a warm-up operation

Konica-Minolta Bizhub C200e Common Errors

The most common error codes.

Error
C5102Description: Transport motor’s failure to turn • The motor lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
C2559Description: Cyan TCR sensor adjustment failure • TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value.
C2A03Description: EEPROM access error (TC Y) • An error was found when reading or writing data. • The error was found when reading out the counter value.
C0215Description: LCT shift motor malfunction
C3821Description: Fusing abnormally low temperature detection (heating side) • The heating roller thermistor continues to detect a temperature lower than a predetermined one for a predetermined period of time. • In the states other than a warm-up operation
C5102Description: Transport motor’s failure to turn • The motor lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
C2559Description: Cyan TCR sensor adjustment failure • TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value.
C2A03Description: EEPROM access error (TC Y) • An error was found when reading or writing data. • The error was found when reading out the counter value.
C0215Description: LCT shift motor malfunction
C3821Description: Fusing abnormally low temperature detection (heating side) • The heating roller thermistor continues to detect a temperature lower than a predetermined one for a predetermined period of time. • In the states other than a warm-up operation