Konica-Minolta bizhub Pro 958 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta bizhub Pro 958 Top Searches

These results are ranked by popularity.

Error
C3823Description: Fusing abnormally low temperature detection (pressure). Detected temperature of the pressure roller thermistor/2 (TH3) goes beyond a given temperature for a given period of time consecutively.
72-40, 72-41Description: Misfeed at ZU section. 72-40 The FNS middle sensor (PS36) is not turned OFF even after the set period of time has elapsed after it is turned ON by the paper. 71-41
C6911, C6912, C6913Description: • C6911: DSC board mount failure 2 • C6912: DSC Bus check NG2-1 • C6913: DSC Bus check NG2-2 • C6911: When MFP detects that DSC board/2 (back side) is not properly installed. • C6912, C6913: When DSC bus check (back side) detects an error.
D-1Description: Split line detect (front side). • While recovering from the power save mode or when the main power switch and power key are ON, it detects whether or not stain exist at the original reading glass when the DF is closed. This warning will be d
CD013, CD014Description: CD013: HDD mirroring error master CD014: HDD mirroring error slave. CD013: A R/W error occurs in the master drive during mirroring. CD014: A R/W error occurs in the slave drive during mirroring.

Konica-Minolta bizhub Pro 958 Common Errors

The most common error codes.

Error
C3823Description: Fusing abnormally low temperature detection (pressure). Detected temperature of the pressure roller thermistor/2 (TH3) goes beyond a given temperature for a given period of time consecutively.
72-40, 72-41Description: Misfeed at ZU section. 72-40 The FNS middle sensor (PS36) is not turned OFF even after the set period of time has elapsed after it is turned ON by the paper. 71-41
C6911, C6912, C6913Description: • C6911: DSC board mount failure 2 • C6912: DSC Bus check NG2-1 • C6913: DSC Bus check NG2-2 • C6911: When MFP detects that DSC board/2 (back side) is not properly installed. • C6912, C6913: When DSC bus check (back side) detects an error.
D-1Description: Split line detect (front side). • While recovering from the power save mode or when the main power switch and power key are ON, it detects whether or not stain exist at the original reading glass when the DF is closed. This warning will be d
CD013, CD014Description: CD013: HDD mirroring error master CD014: HDD mirroring error slave. CD013: A R/W error occurs in the master drive during mirroring. CD014: A R/W error occurs in the slave drive during mirroring.
CD013, CD014Description: CD013: HDD mirroring error master CD014: HDD mirroring error slave. CD013: A R/W error occurs in the master drive during mirroring. CD014: A R/W error occurs in the slave drive during mirroring.
C1081, C1082Description: • C1081: SD communication error (Finisher detection) • C1082: SD communication error (SD detection). When a communication error is detected between the FS control board (FSCB) and the SD control board
D-1Description: Split line detect (front side). • While recovering from the power save mode or when the main power switch and power key are ON, it detects whether or not stain exist at the original reading glass when the DF is closed. This warning will be d
72-40, 72-41Description: Misfeed at ZU section. 72-40 The FNS middle sensor (PS36) is not turned OFF even after the set period of time has elapsed after it is turned ON by the paper. 71-41
C1404Description: PI flash ROM error. Data of flash ROM of the PI is determined to be faulty when the main power switch is turned ON.