Konica-Minolta Bizhub 7828 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 7828 Top Searches

These results are ranked by popularity.

Error
CA051Description: Standard controller configuration failure • The controller of the MFP board (MFPB) is faulty.
C2564Description: TCR sensor failure • Alarm signals for a TCR sensor are detected. This detection is used for detecting disconnection of TCR sensor board (TCRSB) connector.
C1183Description: Elevate drive malfunction • During downward movement, the tray 2 upper limit sensor (PS24) is turned OFF and the tray 2 lower limit sensor (PS21) is turned ON. • The elevate motor (M15) lock signal remains set to
C5103Description: Transport motor’s turning at abnormal timing • The motor lock signal remains LOW for a predetermined continuous period of time while the motor remains stationary
C11A2Description: Accommodation roller pressure/ retraction malfunction • The accommodation roller pressure sensor (PS13) is turned neither ON nor OFF even after the set period of time has elapsed after the accommodation roller ret

Konica-Minolta Bizhub 7828 Common Errors

The most common error codes.

Error
CA051Description: Standard controller configuration failure • The controller of the MFP board (MFPB) is faulty.
C2564Description: TCR sensor failure • Alarm signals for a TCR sensor are detected. This detection is used for detecting disconnection of TCR sensor board (TCRSB) connector.
C1183Description: Elevate drive malfunction • During downward movement, the tray 2 upper limit sensor (PS24) is turned OFF and the tray 2 lower limit sensor (PS21) is turned ON. • The elevate motor (M15) lock signal remains set to
C5103Description: Transport motor’s turning at abnormal timing • The motor lock signal remains LOW for a predetermined continuous period of time while the motor remains stationary
C11A2Description: Accommodation roller pressure/ retraction malfunction • The accommodation roller pressure sensor (PS13) is turned neither ON nor OFF even after the set period of time has elapsed after the accommodation roller ret
CA051Description: Standard controller configuration failure • The controller of the MFP board (MFPB) is faulty.
C2564Description: TCR sensor failure • Alarm signals for a TCR sensor are detected. This detection is used for detecting disconnection of TCR sensor board (TCRSB) connector.
C1183Description: Elevate drive malfunction • During downward movement, the tray 2 upper limit sensor (PS24) is turned OFF and the tray 2 lower limit sensor (PS21) is turned ON. • The elevate motor (M15) lock signal remains set to
C5103Description: Transport motor’s turning at abnormal timing • The motor lock signal remains LOW for a predetermined continuous period of time while the motor remains stationary
C11A2Description: Accommodation roller pressure/ retraction malfunction • The accommodation roller pressure sensor (PS13) is turned neither ON nor OFF even after the set period of time has elapsed after the accommodation roller ret