Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 7818 Top Searches

These results are ranked by popularity.

Error
C0211Description: Bypass tray lift-up failure • When a print cycle is completed, a jam is fixed, or the power switch is turned ON, if the bypass lift sensor (PS4) does not change from the unblocked to blocked condition after the lapse of a given period of tim
C4101Description: Polygon motor malfunction • A HIGH polygon motor lock signal is not detected within a given period of time that begins 0.5 sec. after the polygon motor has started turning. • A LOW polygon motor lock signal is not detected for a continuous g
C2351Description: Suction fan motor malfunction • The fan lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
C5102Description: Main motor malfunction • The main motor (M1) lock signal remains HIGH for a continuous 1-sec. period at any time 1 sec. after the main motor has started turning.
C2557Description: Abnormally low T/C ratio • The T/C ratios detected by the TCR sensor board (TCRSB) are below the threshold for the detection of abnormally low T/C ratio for three successive times. However, if a toner empty condition is detected, this abnorm

Konica-Minolta Bizhub 7818 Common Errors

The most common error codes.

Error
C0211Description: Bypass tray lift-up failure • When a print cycle is completed, a jam is fixed, or the power switch is turned ON, if the bypass lift sensor (PS4) does not change from the unblocked to blocked condition after the lapse of a given period of tim
C4101Description: Polygon motor malfunction • A HIGH polygon motor lock signal is not detected within a given period of time that begins 0.5 sec. after the polygon motor has started turning. • A LOW polygon motor lock signal is not detected for a continuous g
C2351Description: Suction fan motor malfunction • The fan lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
C5102Description: Main motor malfunction • The main motor (M1) lock signal remains HIGH for a continuous 1-sec. period at any time 1 sec. after the main motor has started turning.
C2557Description: Abnormally low T/C ratio • The T/C ratios detected by the TCR sensor board (TCRSB) are below the threshold for the detection of abnormally low T/C ratio for three successive times. However, if a toner empty condition is detected, this abnorm
C0211Description: Bypass tray lift-up failure • When a print cycle is completed, a jam is fixed, or the power switch is turned ON, if the bypass lift sensor (PS4) does not change from the unblocked to blocked condition after the lapse of a given period of tim
C4101Description: Polygon motor malfunction • A HIGH polygon motor lock signal is not detected within a given period of time that begins 0.5 sec. after the polygon motor has started turning. • A LOW polygon motor lock signal is not detected for a continuous g
C2351Description: Suction fan motor malfunction • The fan lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
C5102Description: Main motor malfunction • The main motor (M1) lock signal remains HIGH for a continuous 1-sec. period at any time 1 sec. after the main motor has started turning.
C2557Description: Abnormally low T/C ratio • The T/C ratios detected by the TCR sensor board (TCRSB) are below the threshold for the detection of abnormally low T/C ratio for three successive times. However, if a toner empty condition is detected, this abnorm