Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 754e Top Searches

These results are ranked by popularity.

Error
C1102Description: Main tray up/down motor’s drive malfunction • While the exit tray is being lifted, the main tray upper position sensor (PS26/PS27) is not blocked and the main tray upper position detect switch (SW2) is not turned O
CC158Description: Finisher ROM error (ZU) Data of flash ROM of the z-folding unit is determined to be faulty when the power is turned ON.
C6104Description: Back side cleaning home sensor abnormality (initial) • The back side cleaning home sensor (PS9) does not change from H to L even after the lapse of a given period of time after the home position detecting operation is started at the initial
C3725Description: Fusing abnormally high temperature detection (Center of the heating roller) The heating roller temperature sensor/4 continues to detect a temperature higher than a predetermined one for a predetermined period of time.
C11A2Description: Receiving roller pressure/ retraction motor's malfunction. Detection timing The receiving roller retraction sensor (PS11) is not blocked or unblocked even after the set period of time has elapsed after the receivin

Konica-Minolta Bizhub 754e Common Errors

The most common error codes.

Error
C1102Description: Main tray up/down motor’s drive malfunction • While the exit tray is being lifted, the main tray upper position sensor (PS26/PS27) is not blocked and the main tray upper position detect switch (SW2) is not turned O
CC158Description: Finisher ROM error (ZU) Data of flash ROM of the z-folding unit is determined to be faulty when the power is turned ON.
C6104Description: Back side cleaning home sensor abnormality (initial) • The back side cleaning home sensor (PS9) does not change from H to L even after the lapse of a given period of time after the home position detecting operation is started at the initial
C3725Description: Fusing abnormally high temperature detection (Center of the heating roller) The heating roller temperature sensor/4 continues to detect a temperature higher than a predetermined one for a predetermined period of time.
C11A2Description: Receiving roller pressure/ retraction motor's malfunction. Detection timing The receiving roller retraction sensor (PS11) is not blocked or unblocked even after the set period of time has elapsed after the receivin
C1102Description: Main tray up/down motor’s drive malfunction • While the exit tray is being lifted, the main tray upper position sensor (PS26/PS27) is not blocked and the main tray upper position detect switch (SW2) is not turned O
CC158Description: Finisher ROM error (ZU) Data of flash ROM of the z-folding unit is determined to be faulty when the power is turned ON.
C6104Description: Back side cleaning home sensor abnormality (initial) • The back side cleaning home sensor (PS9) does not change from H to L even after the lapse of a given period of time after the home position detecting operation is started at the initial
C3725Description: Fusing abnormally high temperature detection (Center of the heating roller) The heating roller temperature sensor/4 continues to detect a temperature higher than a predetermined one for a predetermined period of time.
C11A2Description: Receiving roller pressure/ retraction motor's malfunction. Detection timing The receiving roller retraction sensor (PS11) is not blocked or unblocked even after the set period of time has elapsed after the receivin