Konica-Minolta Bizhub 754 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 754 Top Searches

These results are ranked by popularity.

Error
C1133Description: Punch shift motor’s drive malfunction Detection timing The punch shift home sensor (PS605) is not turned ON, or is not turned OFF after it is turned ON, even after the set period of time has elapsed after th
CD004Description: Hard disk access error (connection failure) Unable to communicate between the hard disk and printer control board (PRCB).
C8106Description: Lift up mechanism failure (Downward movement) The lift up lower sensor (PS3) is not blocked after a lapse of a given time after the lift-up motor (M5) goes down (is turned backward).
C4501Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C2414Description: Developing unit new release failure The status with the new unit is not cleared after the new developing unit is set.

Konica-Minolta Bizhub 754 Common Errors

The most common error codes.

Error
C1133Description: Punch shift motor’s drive malfunction Detection timing The punch shift home sensor (PS605) is not turned ON, or is not turned OFF after it is turned ON, even after the set period of time has elapsed after th
CD004Description: Hard disk access error (connection failure) Unable to communicate between the hard disk and printer control board (PRCB).
C8106Description: Lift up mechanism failure (Downward movement) The lift up lower sensor (PS3) is not blocked after a lapse of a given time after the lift-up motor (M5) goes down (is turned backward).
C4501Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C2414Description: Developing unit new release failure The status with the new unit is not cleared after the new developing unit is set.
C1133Description: Punch shift motor’s drive malfunction Detection timing The punch shift home sensor (PS605) is not turned ON, or is not turned OFF after it is turned ON, even after the set period of time has elapsed after th
CD004Description: Hard disk access error (connection failure) Unable to communicate between the hard disk and printer control board (PRCB).
C8106Description: Lift up mechanism failure (Downward movement) The lift up lower sensor (PS3) is not blocked after a lapse of a given time after the lift-up motor (M5) goes down (is turned backward).
C4501Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C2414Description: Developing unit new release failure The status with the new unit is not cleared after the new developing unit is set.